학술논문


EBSCO Discovery Service
발행년
-
(예 : 2010-2015)
전자자료 공정이용 안내

우리 대학 도서관에서 구독·제공하는 모든 전자자료(데이터베이스, 전자저널, 전자책 등)는 국내외 저작권법과 출판사와의 라이선스 계약에 따라 엄격하게 보호를 받고 있습니다.
전자자료의 비정상적 이용은 출판사로부터의 경고, 서비스 차단, 손해배상 청구 등 학교 전체에 심각한 불이익을 초래할 수 있으므로, 아래의 공정이용 지침을 반드시 준수해 주시기 바랍니다.

공정이용 지침
  • 전자자료는 개인의 학습·교육·연구 목적의 비영리적 사용에 한하여 이용할 수 있습니다.
  • 합리적인 수준의 다운로드 및 출력만 허용됩니다. (일반적으로 동일 PC에서 동일 출판사의 논문을 1일 30건 이하 다운로드할 것을 권장하며, 출판사별 기준에 따라 다를 수 있습니다.)
  • 출판사에서 제공한 논문의 URL을 수업 관련 웹사이트에 게재할 수 있으나, 출판사 원문 파일 자체를 복제·배포해서는 안 됩니다.
  • 본인의 ID/PW를 타인에게 제공하지 말고, 도용되지 않도록 철저히 관리해 주시기 바랍니다.
불공정 이용 사례
  • 전자적·기계적 수단(다운로딩 프로그램, 웹 크롤러, 로봇, 매크로, RPA 등)을 이용한 대량 다운로드
  • 동일 컴퓨터 또는 동일 IP에서 단시간 내 다수의 원문을 집중적으로 다운로드하거나, 전권(whole issue) 다운로드
  • 저장·출력한 자료를 타인에게 배포하거나 개인 블로그·웹하드 등에 업로드
  • 상업적·영리적 목적으로 자료를 전송·복제·활용
  • ID/PW를 타인에게 양도하거나 타인 계정을 도용하여 이용
  • EndNote, Mendeley 등 서지관리 프로그램의 Find Full Text 기능을 이용한 대량 다운로드
  • 출판사 콘텐츠를 생성형 AI 시스템에서 활용하는 행위(업로드, 개발, 학습, 프로그래밍, 개선 또는 강화 등)
위반 시 제재
  • 출판사에 의한 해당 IP 또는 기관 전체 접속 차단
  • 출판사 배상 요구 시 위반자 개인이 배상 책임 부담
'학술논문' 에서 검색결과 369건 | 목록 1~20
Academic Journal
Ferenc Segedin D; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; Kim J; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; LaBollita H; Department of Physics, Arizona State University, Tempe, Arizona 85287, United States.; Center for Computational Quantum Physics, Flatiron Institute, 162 fifth Avenue, New York, New York 10010, United States.; Taylor NK; School of Engineering and Applied Science, Harvard University, Cambridge, Massachusetts 02138, United States.; Baek KY; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; Sung SH; The Rowland Institute at Harvard, Harvard University, Cambridge, Massachusetts 02138, United States.; Turkiewicz AB; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; Pan GA; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; Jiang AY; School of Engineering and Applied Science, Harvard University, Cambridge, Massachusetts 02138, United States.; Bambrick-Santoyo M; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology, Cambridge, Massachusetts 02138, United States.; Schwaigert T; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; Kim CK; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; Tenneti A; Smith School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, New York 14853, United States.; Grutter AJ; NIST Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, United States.; Muramoto S; Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899, United States.; N'Diaye AT; Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States.; El Baggari I; The Rowland Institute at Harvard, Harvard University, Cambridge, Massachusetts 02138, United States.; Walko DA; Advanced Photon Source, Argonne National Laboratory, Lemont, Illinois 60439, United States.; Brooks CM; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; Botana AS; Department of Physics, Arizona State University, Tempe, Arizona 85287, United States.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, United States.; Leibniz-Institut für Kristallzüchtung, Max-Born-Str. 2, 12489 Berlin, Germany.; Zhou H; Advanced Photon Source, Argonne National Laboratory, Lemont, Illinois 60439, United States.; Mundy JA; Department of Physics, Harvard University, Cambridge, Massachusetts 02138, United States.; School of Engineering and Applied Science, Harvard University, Cambridge, Massachusetts 02138, United States.
Publisher: American Chemical Society Country of Publication: United States NLM ID: 7503056 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1520-5126 (Electronic) Linking ISSN: 00027863 NLM ISO Abbreviation: J Am Chem Soc Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Tarsi G; Université Caen Normandie, ENSICAEN, CNRS, Normandie Université, GREYC UMR 6072, F14000 Caen, France.; Manca N; CNR-SPIN, C.so F. M. Perrone, 24, 16152 Genova, Italy.; Pellegrino L; CNR-SPIN, C.so F. M. Perrone, 24, 16152 Genova, Italy.; Pierron V; Université Caen Normandie, ENSICAEN, CNRS, Normandie Université, GREYC UMR 6072, F14000 Caen, France.; Bernini C; CNR-SPIN, C.so F. M. Perrone, 24, 16152 Genova, Italy.; Guillet B; Université Caen Normandie, ENSICAEN, CNRS, Normandie Université, GREYC UMR 6072, F14000 Caen, France.; Flament S; Université Caen Normandie, ENSICAEN, CNRS, Normandie Université, GREYC UMR 6072, F14000 Caen, France.; Brasse G; Université Caen Normandie, ENSICAEN, CEA, CNRS, Normandie Université, CIMAP UMR 6252, F14000 Caen, France.; Lüders U; Université Caen Normandie, ENSICAEN, CNRS, Normandie Université, CRISMAT UMR 6508, F14000 Caen, France.; Wang Z; Department of Material Science and Engineering, Cornell University, Ithaca, New York 14853-1501, United States.; Schlom DG; Department of Material Science and Engineering, Cornell University, Ithaca, New York 14853-1501, United States.; Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, New York 14853-1501, United States.; Marré D; CNR-SPIN, C.so F. M. Perrone, 24, 16152 Genova, Italy.; Dipartimento di Fisica, Universitá degli Studi di Genova, Via Dodecaneso, 33, 16146 Genova, Italy.; Méchin L; Université Caen Normandie, ENSICAEN, CNRS, Normandie Université, GREYC UMR 6072, F14000 Caen, France.
Publisher: American Chemical Society Country of Publication: United States NLM ID: 101504991 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1944-8252 (Electronic) Linking ISSN: 19448244 NLM ISO Abbreviation: ACS Appl Mater Interfaces Subsets: MEDLINE
Academic Journal
Hasan Z; Department of Physics, Harvard University, Cambridge, MA, USA.; Pan GA; Department of Physics, Harvard University, Cambridge, MA, USA.; LaBollita H; Department of Physics, Arizona State University, Tempe, AZ, USA.; Kaczmarek A; Laboratory of Atomic and Solid-State Physics, Cornell University, Ithaca, NY, USA.; Sung SH; The Rowland Institute, Harvard University, Cambridge, MA, USA.; Sharma S; Department of Physics, Arizona State University, Tempe, AZ, USA.; Balakrishnan PP; NIST Center for Neutron Research, National Institute for Standards and Technology, Gaithersburg, MD, USA.; Mercer E; Department of Physics, Northeastern University, Boston, MA, USA.; Quantum Materials and Sensing Institute, Northeastern University, Burlington, MA, USA.; Bhartiya V; National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, NY, USA.; N'Diaye AT; Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley, CA, USA.; Salman Z; PSI Center for Neutron and Muon Sciences, Villigen, Switzerland.; Prokscha T; PSI Center for Neutron and Muon Sciences, Villigen, Switzerland.; Suter A; PSI Center for Neutron and Muon Sciences, Villigen, Switzerland.; Grutter AJ; NIST Center for Neutron Research, National Institute for Standards and Technology, Gaithersburg, MD, USA.; Garcia-Fernandez M; Diamond Light Source, Harwell Campus, Didcot, UK.; Zhou KJ; Diamond Light Source, Harwell Campus, Didcot, UK.; Pelliciari J; National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, NY, USA.; Bisogni V; National Synchrotron Light Source II, Brookhaven National Laboratory, Upton, NY, USA.; El Baggari I; The Rowland Institute, Harvard University, Cambridge, MA, USA.; Schlom DG; Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, USA.; Leibniz-Institut für Kristallzüchtung, Berlin, Germany.; Barone MR; Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, USA.; Brooks CM; Department of Physics, Harvard University, Cambridge, MA, USA.; Nowack KC; Laboratory of Atomic and Solid-State Physics, Cornell University, Ithaca, NY, USA.; Botana AS; Department of Physics, Arizona State University, Tempe, AZ, USA.; Faeth BD; Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, USA.; de la Torre A; Department of Physics, Northeastern University, Boston, MA, USA. a.delatorreduran@northeastern.edu.; Quantum Materials and Sensing Institute, Northeastern University, Burlington, MA, USA. a.delatorreduran@northeastern.edu.; Mundy JA; Department of Physics, Harvard University, Cambridge, MA, USA. mundy@fas.harvard.edu.
Publisher: Nature Pub. Group Country of Publication: England NLM ID: 101528555 Publication Model: Electronic Cited Medium: Internet ISSN: 2041-1723 (Electronic) Linking ISSN: 20411723 NLM ISO Abbreviation: Nat Commun Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Huang X; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Song Q; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Department of Materials Science and Engineering, University of California, Irvine, CA, 92697, USA.; Gurung G; Trinity College, University of Oxford, Oxford, OX1 3BH, UK.; Department of Physics and Astronomy and Nebraska Center for Materials and Nanoscience, University of Nebraska, Lincoln, NE, 68588, USA.; Pharis DA; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Cham TMJ; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Chen Y; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Jain R; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Olszewski M; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Feng Y; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; El-Ghazaly A; Electrical and Computer Engineering, Cornell University, Ithaca, NY, 14853, USA.; Tsymbal EY; Department of Physics and Astronomy and Nebraska Center for Materials and Nanoscience, University of Nebraska, Lincoln, NE, 68588, USA.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.; Leibniz-Institut fur Kristallzüchtung, Max-Born-Str. 2, 12489, Berlin, Germany.; Ralph DC; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.
Publisher: Wiley-VCH Country of Publication: Germany NLM ID: 9885358 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1521-4095 (Electronic) Linking ISSN: 09359648 NLM ISO Abbreviation: Adv Mater Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Suceava A; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Hazra S; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Ross A; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Philippi IR; Department of Physics, The Pennsylvania State University, University Park, PA, 16802, USA.; Sotir D; Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, 14853, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Brower B; Department of Physics, The Pennsylvania State University, University Park, PA, 16802, USA.; Ding L; Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA, 16802, USA.; Zhu Y; Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA, 16802, USA.; Zhang Z; Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA, 16802, USA.; Sarkar H; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Sarker S; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Yang Y; Department of Engineering Science and Mechanics, The Pennsylvania State University, University Park, PA, 16802, USA.; Department of Nuclear Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Materials Research Institute, The Pennsylvania State University, University Park, PA, 16802, USA.; Sarker S; Cornell High Energy Synchrotron Source, Cornell University, Ithaca, NY, 14853, USA.; Stoica VA; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, 12489, Berlin, Germany.; Chen LQ; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Gopalan V; Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 16802, USA.; Department of Physics, The Pennsylvania State University, University Park, PA, 16802, USA.
Publisher: Wiley-VCH Country of Publication: Germany NLM ID: 9885358 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1521-4095 (Electronic) Linking ISSN: 09359648 NLM ISO Abbreviation: Adv Mater Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Zhang X; Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.; Lee S; Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.; Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA, USA.; Ryu JE; Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.; Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA, USA.; Suh JM; School of Transdisciplinary Innovations, Seoul National University, Seoul, Republic of Korea.; Department of Materials Science and Engineering, Research Institute of Advanced Materials, Seoul National University, Seoul, Republic of Korea.; Kim TH; School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA.; Department of Semiconductor Engineering, Seoul National University of Science & Technology, Seoul, Republic of Korea.; Barone MR; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Parker NA; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Lee G; Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.; Kim IJ; Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea.; Yeo I; School of Electrical Engineering, Chosun University, Gwangju, Republic of Korea.; Shin J; Artie McFerrin Department of Chemical Engineering, Texas A&M University, College Station, TX, USA.; Lee JS; Department of Materials Science and Engineering, Pohang University of Science and Technology, Pohang, Republic of Korea.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, NY, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Str. 2, 12489 Berlin, Germany.; Chang CS; Department of Physics and Astronomy, Seoul National University, Seoul, Republic of Korea.; Seo JS; School of Electrical and Computer Engineering, Cornell Tech, New York, NY, USA.; Yu S; School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA, USA.; Song MK; School of Electrical Engineering, Korea University, Seoul, Republic of Korea.; Kim J; Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.; Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA.; Research Laboratory of Electronics, Massachusetts Institute of Technology, Cambridge, MA, USA.; Microsystems Technology Laboratories, Massachusetts Institute of Technology, Cambridge, MA, USA.
Publisher: American Association for the Advancement of Science Country of Publication: United States NLM ID: 101653440 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 2375-2548 (Electronic) Linking ISSN: 23752548 NLM ISO Abbreviation: Sci Adv Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Som J; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; Reese AJ; School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, New York 14853, United States.; Mitrovic L; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; Kim RS; Molecular Biophysics and Integrated Bioimaging Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States.; McBride S; Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire 03755, United States.; Nalawade SS; Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, North Carolina 27401, United States.; Aravamudhan S; Joint School of Nanoscience and Nanoengineering, North Carolina A&T State University, Greensboro, North Carolina 27401, United States.; Hautier G; Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire 03755, United States.; Yano J; Molecular Biophysics and Integrated Bioimaging Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720, United States.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, United States.; Leibniz-Institut für Kristallzüchtung, Berlin 12489, Germany.; Suntivich J; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, United States.
Publisher: American Chemical Society Country of Publication: United States NLM ID: 7503056 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1520-5126 (Electronic) Linking ISSN: 00027863 NLM ISO Abbreviation: J Am Chem Soc Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Gollwitzer J; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Kaaret JZ; Cornell University, School of Applied and Engineering Physics, Ithaca, New York 14853, USA.; Suyolcu YE; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Khalsa G; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; University of North Texas, Department of Physics, Denton, Texas 76203, USA.; Fernandes RC; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Gorobtsov O; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Buchenau S; Cornell University, School of Applied and Engineering Physics, Ithaca, New York 14853, USA.; You C; Cornell University, Department of Physics, Ithaca, New York 14853, USA.; Higgins J; Cornell University, School of Applied and Engineering Physics, Ithaca, New York 14853, USA.; Russell RS; University of California, Materials Department, Santa Barbara, California 93106, USA.; Shao Z; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Birkhölzer YA; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Sato T; The Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025, USA.; Chollet M; The Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025, USA.; Coslovich G; The Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025, USA.; Brützam M; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, 12489 Berlin, Germany.; Guguschev C; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, 12489 Berlin, Germany.; Harter JW; University of California, Materials Department, Santa Barbara, California 93106, USA.; Disa AS; Cornell University, School of Applied and Engineering Physics, Ithaca, New York 14853, USA.; Schlom DG; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, 12489 Berlin, Germany.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, USA.; Benedek NA; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Singer A; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.
Publisher: American Physical Society Country of Publication: United States NLM ID: 0401141 Publication Model: Print Cited Medium: Internet ISSN: 1079-7114 (Electronic) Linking ISSN: 00319007 NLM ISO Abbreviation: Phys Rev Lett Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Gupta NK; Department of Physics and Astronomy, University of Waterloo, Waterloo, Canada.; Gong R; Department of Physics and Astronomy, University of Waterloo, Waterloo, Canada.; Wu Y; Laboratory of Atomic and Solid State Physics, Department of Physics, Cornell University, Ithaca, NY, USA.; Kang M; Laboratory of Atomic and Solid State Physics, Department of Physics, Cornell University, Ithaca, NY, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, NY, USA.; Parzyck CT; Laboratory of Atomic and Solid State Physics, Department of Physics, Cornell University, Ithaca, NY, USA.; Gregory BZ; Laboratory of Atomic and Solid State Physics, Department of Physics, Cornell University, Ithaca, NY, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Costa N; Department of Physics and Astronomy, University of Waterloo, Waterloo, Canada.; Sutarto R; Canadian Light Source, Saskatoon, Saskatchewan, Canada.; Sarker S; Cornell High Energy Synchrotron Source, Cornell University, Ithaca, NY, USA.; Singer A; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, USA.; Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, NY, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, Berlin, Germany.; Shen KM; Laboratory of Atomic and Solid State Physics, Department of Physics, Cornell University, Ithaca, NY, USA. kmshen@cornell.edu.; Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, NY, USA. kmshen@cornell.edu.; Hawthorn DG; Department of Physics and Astronomy, University of Waterloo, Waterloo, Canada. david.hawthorn@uwaterloo.ca.
Publisher: Nature Pub. Group Country of Publication: England NLM ID: 101528555 Publication Model: Electronic Cited Medium: Internet ISSN: 2041-1723 (Electronic) Linking ISSN: 20411723 NLM ISO Abbreviation: Nat Commun Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Hunnestad KA; Department of Materials Science and Engineering, NTNU Norwegian University of Science and Technology, Trondheim, 7491, Norway.; Acoustics Group, Department of Electronic Systems, NTNU Norwegian University of Science and Technology, Trondheim, 7491, Norway.; Centre for Geophysical Forecasting, NTNU Norwegian University of Science and Technology, Trondheim, 7491, Norway.; Das H; Laboratory for Materials and Structures, Institute of Innovative Research, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama, 226-8503, Japan.; Hatzoglou C; Department of Materials Science and Engineering, NTNU Norwegian University of Science and Technology, Trondheim, 7491, Norway.; Holtz M; School of Applied and Engineering Physics, Cornell University, Ithaca, NY, 14853, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Brooks CM; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; van Helvoort ATJ; Department of Physics, NTNU Norwegian University of Science and Technology, Trondheim, 7491, Norway.; Muller DA; School of Applied and Engineering Physics, Cornell University, Ithaca, NY, 14853, USA.; Kavli Institute at Cornell for Nanoscience, Ithaca, NY, 14853, USA.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Kavli Institute at Cornell for Nanoscience, Ithaca, NY, 14853, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Str. 2, Berlin, 12489, Germany.; Mundy JA; Department of Physics, Harvard University, Cambridge, MA, 02138, USA.; Meier D; Department of Materials Science and Engineering, NTNU Norwegian University of Science and Technology, Trondheim, 7491, Norway. dennis.meier@ntnu.no.
Publisher: Nature Pub. Group Country of Publication: England NLM ID: 101528555 Publication Model: Electronic Cited Medium: Internet ISSN: 2041-1723 (Electronic) Linking ISSN: 20411723 NLM ISO Abbreviation: Nat Commun Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Wang Q; Department of Physics, The Chinese University of Hong Kong, Shatin, Hong Kong, China. qwang@cuhk.edu.hk.; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland. qwang@cuhk.edu.hk.; Mustafi S; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; Fogh E; Institute of Physics, École Polytechnique Fedérale de Lausanne (EPFL), CH-1015, Lausanne, Switzerland.; Astrakhantsev N; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; He Z; Institute of High Energy Physics, Chinese Academy of Sciences (CAS), 100049, Beijing, China.; Spallation Neutron Source Science Center (SNSSC), Dongguan, 523803, China.; Biało I; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; AGH University of Krakow, Faculty of Physics and Applied Computer Science, 30-059, Krakow, Poland.; Chan Y; Department of Physics, The Chinese University of Hong Kong, Shatin, Hong Kong, China.; Martinelli L; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; Horio M; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; Ivashko O; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; Shaik NE; Institute of Physics, École Polytechnique Fedérale de Lausanne (EPFL), CH-1015, Lausanne, Switzerland.; Arx KV; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; Sassa Y; Department of Applied Physics, KTH Royal Institute of Technology, SE-106 91, Stockholm, Sweden.; Paris E; Swiss Light Source, Paul Scherrer Institut, CH-5232, Villigen PSI, Switzerland.; Fischer MH; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland.; Tseng Y; Swiss Light Source, Paul Scherrer Institut, CH-5232, Villigen PSI, Switzerland.; Christensen NB; Department of Physics, Technical University of Denmark, DK-2800, Kongens Lyngby, Denmark.; Galdi A; Dipartimento di Ingegneria Industriale, Universita' degli Studi di Salerno, 84084, Fisciano, SA, Italy.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14850, USA.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14850, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.; Shen KM; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.; Department of Physics, Laboratory of Atomic and Solid State Physics, Cornell University, Ithaca, NY, 14853, USA.; Schmitt T; Swiss Light Source, Paul Scherrer Institut, CH-5232, Villigen PSI, Switzerland.; Rønnow HM; Institute of Physics, École Polytechnique Fedérale de Lausanne (EPFL), CH-1015, Lausanne, Switzerland.; Chang J; Physik-Institut, Universität Zürich, Winterthurerstrasse 190, CH-8057, Zürich, Switzerland. johan.chang@physik.uzh.ch.
Publisher: Nature Pub. Group Country of Publication: England NLM ID: 101528555 Publication Model: Electronic Cited Medium: Internet ISSN: 2041-1723 (Electronic) Linking ISSN: 20411723 NLM ISO Abbreviation: Nat Commun Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Pieczulewski N; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Smith KT; School of Applied and Engineering Physics, Cornell University, Ithaca, New York 14853, USA.; Efaw CM; Micron School of Materials Science and Engineering, Boise State University, Boise, Idaho 83725, USA.; Singh A; School of Electrical and Computer Engineering, Cornell University, Ithaca, New York 14853, USA.; Gorsak CA; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Buontempo JT; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Wensel J; Micron Technology, 8000 S Federal Way, Boise, Idaho 83707, USA.; Azizie K; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Gann K; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Thompson MO; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Schlom DGRana F; School of Electrical and Computer Engineering, Cornell University, Ithaca, New York 14853, USA.; Nair HP; Department of Materials Science and Engineering, Cornell University, Ithaca, New York 14853, USA.; Hues SM; Micron School of Materials Science and Engineering, Boise State University, Boise, Idaho 83725, USA.; Graugnard E; Micron School of Materials Science and Engineering, Boise State University, Boise, Idaho 83725, USA.; Davis PH; Micron School of Materials Science and Engineering, Boise State University, Boise, Idaho 83725, USA.; Jena DXing HGMuller DA
Publisher: AIP Publishing LLC Country of Publication: United States NLM ID: 101645742 Publication Model: Print Cited Medium: Print ISSN: 2166-532X (Print) Linking ISSN: 2166532X NLM ISO Abbreviation: APL Mater Subsets: PubMed not MEDLINE
Academic Journal
Wahila, M J, Butler, K T, Lebens-Higgins, Z W, Hendon, C H, Nandur, A S, Treharne, R E, Quackenbush, N F, Sallis, S, Mason, K, Paik, H, Schlom, D G, Woicik, J C, Guo, J, Arena, D A, White, B E, Watson, G W, Walsh, A & Piper, L F J 2016, 'Lone-pair stabilization in transparent amorphous tin oxides : a potential route to p-type conduction pathways', Chemistry of Materials, vol. 28, no. 13, pp. 4706-4713. https://doi.org/10.1021/acs.chemmater.6b01608
Academic Journal
Ojha SK; Rice Advanced Materials Institute, Rice University, Houston, TX 77005.; Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005.; Pal P; Department of Materials Science and Engineering, University of Wisconsin-Madison, Madison, WI 53706.; Prokhorenko S; Department of Physics and Institute for Nanoscience and Engineering, Smart Ferroic Materials Center, University of Arkansas, Fayetteville, AR 72701.; Husain S; Department of Materials Science and Engineering, University of California, Berkeley, CA 94720.; Ramesh M; Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853.; Li X; Rice Advanced Materials Institute, Rice University, Houston, TX 77005.; Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005.; Kang D; Rice Advanced Materials Institute, Rice University, Houston, TX 77005.; Department of Materials Science and Engineering, University of California, Berkeley, CA 94720.; Meisenheimer P; Department of Materials Science and Engineering, University of California, Berkeley, CA 94720.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853.; Kavli Institute at Cornell for Nanoscale Science, Cornell University, Ithaca, NY 14853.; Leibniz-Institut fur Kristallzuchtung, Berlin 12489, Germany.; Stevenson P; Department of Physics, Northeastern University, Boston, MA 02115.; Caretta L; Department of Physics, School of Engineering, Brown University, Providence, RI 02912.; Nahas Y; Department of Physics and Institute for Nanoscience and Engineering, Smart Ferroic Materials Center, University of Arkansas, Fayetteville, AR 72701.; Han Y; Rice Advanced Materials Institute, Rice University, Houston, TX 77005.; Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005.; Martin LW; Rice Advanced Materials Institute, Rice University, Houston, TX 77005.; Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005.; Departments of Chemistry, Rice University, Houston, TX 77005.; Departments of Physics and Astronomy, Rice University, Houston, TX 77005.; Bellaiche L; Department of Physics and Institute for Nanoscience and Engineering, Smart Ferroic Materials Center, University of Arkansas, Fayetteville, AR 72701.; Department of Materials Science and Engineering, Tel Aviv University, Ramat Aviv, Tel Aviv 6997801, Israel.; Eom CB; Department of Materials Science and Engineering, University of Wisconsin-Madison, Madison, WI 53706.; Ramesh R; Rice Advanced Materials Institute, Rice University, Houston, TX 77005.; Department of Materials Science and NanoEngineering, Rice University, Houston, TX 77005.; Department of Materials Science and Engineering, University of California, Berkeley, CA 94720.; Departments of Chemistry, Rice University, Houston, TX 77005.; Departments of Physics and Astronomy, Rice University, Houston, TX 77005.; Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, CA 94720.; Department of Physics, University of California, Berkeley, CA 94720.
Publisher: National Academy of Sciences Country of Publication: United States NLM ID: 7505876 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1091-6490 (Electronic) Linking ISSN: 00278424 NLM ISO Abbreviation: Proc Natl Acad Sci U S A Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Scheid A; Max Planck Institute for Solid State Research, Stuttgart 70569, Germany.; Heil T; Max Planck Institute for Solid State Research, Stuttgart 70569, Germany.; Suyolcu YE; Max Planck Institute for Solid State Research, Stuttgart 70569, Germany.; Song Q; Department of Materials Sciences and Engineering, Cornell University, Ithaca, New York 14853, United States.; Enderlein N; Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), 91058 Erlangen, Germany.; Nono Tchiomo AP; Department of Physics and Astronomy, Louisiana State University, Baton Rouge, Louisiana 70803, United States.; Ngabonziza P; Department of Physics and Astronomy, Louisiana State University, Baton Rouge, Louisiana 70803, United States.; Department of Physics, University of Johannesburg, P.O. Box 524, Auckland Park, 2006 Johannesburg, South Africa.; Hansmann P; Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), 91058 Erlangen, Germany.; Schlom DG; Department of Materials Sciences and Engineering, Cornell University, Ithaca, New York 14853, United States.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, United States.; Leibniz-Institut für Kristallzüchtung, Berlin 12489, Germany.; van Aken PA; Max Planck Institute for Solid State Research, Stuttgart 70569, Germany.
Publisher: American Chemical Society Country of Publication: United States NLM ID: 101504991 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1944-8252 (Electronic) Linking ISSN: 19448244 NLM ISO Abbreviation: ACS Appl Mater Interfaces Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Barbalas D; The Johns Hopkins University, William H. Miller III, Department of Physics and Astronomy, Baltimore, Maryland 21218, USA.; Romero R; The Johns Hopkins University, William H. Miller III, Department of Physics and Astronomy, Baltimore, Maryland 21218, USA.; Chaudhuri D; The Johns Hopkins University, William H. Miller III, Department of Physics and Astronomy, Baltimore, Maryland 21218, USA.; Mahmood F; The Johns Hopkins University, William H. Miller III, Department of Physics and Astronomy, Baltimore, Maryland 21218, USA.; University of Illinois at Urbana-Champaign, Department of Physics, Urbana, Illinois 61801, USA.; University of Illinois at Urbana-Champaign, F. Seitz Materials Research Laboratory, Urbana, Illinois 61801, USA.; Nair HP; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Schreiber NJ; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Schlom DG; Cornell University, Department of Materials Science and Engineering, Ithaca, New York 14853, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Strasse 2, 12489 Berlin, Germany.; Shen KM; Cornell University, Department of Physics, Laboratory of Atomic and Solid State Physics, Ithaca, New York 14853, USA.; Armitage NP; The Johns Hopkins University, William H. Miller III, Department of Physics and Astronomy, Baltimore, Maryland 21218, USA.; Canadian Institute for Advanced Research, Toronto, Ontario M5G 1Z8, Canada.
Publisher: American Physical Society Country of Publication: United States NLM ID: 0401141 Publication Model: Print Cited Medium: Internet ISSN: 1079-7114 (Electronic) Linking ISSN: 00319007 NLM ISO Abbreviation: Phys Rev Lett Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Harris IA; University of California, Berkeley, Department of Physics, California, USA.; Husain S; Lawrence Berkeley National Laboratory, Materials Science Division, Berkeley, California, USA.; University of California, Berkeley, Department of Materials Science and Engineering, California, USA.; Meisenheimer P; University of California, Berkeley, Department of Materials Science and Engineering, California, USA.; Ramesh M; Cornell University, Department of Materials Science and Engineering, Ithaca, New York, USA.; Park HW; Korea Advanced Institute of Science and Technology, Department of Physics, Daejon, Korea.; Caretta L; Brown University, School of Engineering, Providence, Rhode Island, USA.; Schlom DG; Cornell University, Department of Materials Science and Engineering, Ithaca, New York, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, New York 14853, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, 12489 Berlin, Germany.; Yao Z; Lawrence Berkeley National Laboratory, Applied Mathematics and Computational Research Division, Berkeley, California 94720, USA.; Martin LW; University of California, Berkeley, Department of Materials Science and Engineering, California, USA.; Rice University, Department of Materials Science and NanoEngineering, Houston, Texas, USA.; Rice University, Department of Physics and Astronomy, Houston, Texas, USA.; Rice University, Department of Chemistry, Houston, Texas, USA.; Rice University, Rice Advanced Materials Institute, Houston, Texas, USA.; Íñiguez-González J; Luxembourg Institute of Science and Technology, Materials Research and Technology Department, Esch-sur-Alzette, Luxembourg.; University of Luxembourg, Department of Physics and Materials Science, Belvaux, Luxembourg.; Kim SK; Korea Advanced Institute of Science and Technology, Department of Physics, Daejon, Korea.; Ramesh R; University of California, Berkeley, Department of Physics, California, USA.; Lawrence Berkeley National Laboratory, Materials Science Division, Berkeley, California, USA.; University of California, Berkeley, Department of Materials Science and Engineering, California, USA.; Rice University, Department of Materials Science and NanoEngineering, Houston, Texas, USA.; Rice University, Department of Physics and Astronomy, Houston, Texas, USA.; Rice University, Rice Advanced Materials Institute, Houston, Texas, USA.
Publisher: American Physical Society Country of Publication: United States NLM ID: 0401141 Publication Model: Print Cited Medium: Internet ISSN: 1079-7114 (Electronic) Linking ISSN: 00319007 NLM ISO Abbreviation: Phys Rev Lett Subsets: MEDLINE; PubMed not MEDLINE
Academic Journal
Hazra S; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Schwaigert T; Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, 14853, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Ross A; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Lu H; Department of Physics and Astronomy, University of Nebraska, Lincoln, NE, 68588, USA.; Saha U; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Trinquet V; Institute of Condensed Matter and Nanosciences, UCLouvain, Louvain-la-Neuve, 1348, Belgium.; Akkopru-Akgun B; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Gregory BZ; Department of Physics, Cornell University, Ithaca, NY, 14853, USA.; Mangu A; Department of Materials Science and Engineering, Stanford University, Stanford, CA, 94305, USA.; Stanford Institute for Materials Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, CA, 94025, USA.; Sarker S; Cornell High Energy Synchrotron Source, Cornell University, Ithaca, NY, 14853, USA.; Kuznetsova T; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Sarker S; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Li X; Department of Physics and Astronomy, University of Nebraska, Lincoln, NE, 68588, USA.; Barone MR; Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM), Cornell University, Ithaca, NY, 14853, USA.; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Xu X; Department of Physics and Astronomy, University of Nebraska, Lincoln, NE, 68588, USA.; Freeland JW; Advanced Photon Source, Argonne National Laboratory, Argonne, IL, 60439, USA.; Engel-Herbert R; Paul-Drude-Institut für Festkörperelektronik, Leibniz-Institut im Forschungsverbund Berlin e.V., Hausvogteiplatz 5, 10117, Berlin, Germany.; Lindenberg AM; Department of Materials Science and Engineering, Stanford University, Stanford, CA, 94305, USA.; Stanford Institute for Materials Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, CA, 94025, USA.; Singer A; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Trolier-McKinstry S; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Muller DA; School of Applied and Engineering Physics, Cornell University, Ithaca, NY, 14853, USA.; Rignanese GM; Institute of Condensed Matter and Nanosciences, UCLouvain, Louvain-la-Neuve, 1348, Belgium.; Salmani-Rezaie S; Department of Materials Science and Engineering, Ohio State University, Columbus, OH, 43210, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.; Stoica VA; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Gruverman A; Department of Physics and Astronomy, University of Nebraska, Lincoln, NE, 68588, USA.; Chen LQ; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.; Schlom DG; Department of Materials Science and Engineering, Cornell University, Ithaca, NY, 14853, USA.; Kavli Institute at Cornell for Nanoscale Science, Ithaca, NY, 14853, USA.; Leibniz-Institut für Kristallzüchtung, Max-Born-Straße 2, 12489, Berlin, Germany.; Gopalan V; Department of Materials Science and Engineering, Pennsylvania State University, University Park, PA, 16802, USA.
Publisher: Wiley-VCH Country of Publication: Germany NLM ID: 9885358 Publication Model: Print-Electronic Cited Medium: Internet ISSN: 1521-4095 (Electronic) Linking ISSN: 09359648 NLM ISO Abbreviation: Adv Mater Subsets: MEDLINE; PubMed not MEDLINE
검색 결과 제한하기
제한된 항목
[검색어] Schlom, DG
발행연도 제한
-
학술DB(Database Provider)
저널명(출판물, Title)
출판사(Publisher)
자료유형(Source Type)
주제어
언어