부산대학교 도서관

A new coating made of niobium pentoxide, obtained through the sol-gel process, was developed for the carbon steel (SAE 1010). The corrosion protection provided by this coating was evaluated through electrochemical tests such as: open circuit potential, electrochemical impedance spectroscopy and anodic potentiodynamic polarization in NaCl 0,5 mol L-1 solution. The morphology and composition of the coatings were analyzed using scanning electronic microscopy, energy dispersive spectroscopy and X-ray diffractions. A zinc phosphate coating was used as standard test for comparison of results. The electrochemical measurements revealed that: (1) The Nb2O5 coating dislocates the corrosion potential towards more positive values; (2) higher impedance values were found for the Nb2O5 coated samples; and (3) lower current density values were found for these samples. The electronic micrograph revealed that there was alteration in the morphology of the carbon steel surface due to the Nb2O5 deposition. The EDS spectra confirmed the niobium coating deposition, as a peak regarding this element was obtained in the spectra. The X-ray diffractograms confirmed the presence of the phases in the Nb2O5 coating. This new coating increases protection of the carbon steel against corrosion and presents an alternative to replace phosphating.