학술논문
단양 지질공원 내의 산사태 유형과 특징
Types and Characteristics of Landslides in Danyang Geopark
Types and Characteristics of Landslides in Danyang Geopark
Document Type
Article
Author
Source
지질공학 / Korean Society of Engineering Geology. Sep 30, 2023 33(3):427
Subject
Language
Korean
ISSN
1226-5268
Abstract
본 연구에서는 다양한 암종이 분포하는 단양 지질공원 내에서 발생한 산사태를 대상으로 야외지질조사를 통해 유형을 분류하고, 샘플링 및 실내 시험을 통해 산사태 구성 물질의 역학적·수리학적 특성을 분석하였다. 토석류 산사태 유형은 석회암 및 대리암, 셰일, 반상변정질 편마암 지역에서 발생하였으며, 석회암 및 대리암 지역에서는 카렌지형의 영향을 받아 암반과 암반 사이의 토사가 붕괴되는 형태로 다른 두지역의 산사태와 구분된다. 토질시험 결과에서는 조립질 함량이 많은 편마암 풍화토가 다른 두 지역의 풍화토에 비해 내부마찰각이 높고 점착력이 작으며 투수계수가 큰 특징을 보인다. 암반 산사태 유형은 천매암, 사암, 역암 지역에서 발생하였으며, 천매암 지역에서는 평면파괴 형태가, 사암 지역에서는 부석형 낙석 형태가, 역암 지역에서는 전석형 낙석 형태가 발달하고 있다. 천매암의 전단강도는 동일한 암질의 타 암종에 비해 훨씬 낮게 나타나며, 역암의 슬레이크 내구성 지수는 타 암종과 유사하나 시험 전·후시료의 상태를 비교하면 기질부의 차별풍화 및 이로 인한 역의 탈락 형태가 뚜렷이 관찰된다. 본 연구의 결과는 지질특성별 산사태 유형에 따른 적절한 보강방안 및 방재대책을 수립하는데 기여할 수 있을 것으로 기대된다.
We carried out a geological survey to classify the types of mass movement in Danyang Geopark (where various rock types are distributed) and analyzed the mechanical and hydraulic characteristics of landslide materials using a series of laboratory tests. Debris flows occurred in areas of limestone/marble, shale, and porphyroblastic gneiss, and limestone/marble landslides were distinguished from the others through the presence of karren topography. Soil tests showed that soil derived from weathered gneiss, which has a higher proportion of coarse grains, has a higher friction angle, lower cohesion, and larger hydraulic conductivity than soils from areas of limestone/marble, and shale. Rock failure mass movements occurred in areas of phyllite, sandstone, and conglomerate and were subdivided into plane failure, block-fall, and boulder-fall types in areas of phyllite, sandstone, and conglomerate, respectively. The shear strength of phyllite is much lower than that of the other types of rock, which have similar rock quality. The slake durability index of the conglomerate is similar to that of the other rock types, which have similar degrees of weathering, but differential weathering of the matrix and clasts was clearly observed when comparing the samples before and after the test. This study can help establish appropriate reinforcement and disaster prevention measures, which depend on the type of mass movement expected given the geological characteristics of an area.
We carried out a geological survey to classify the types of mass movement in Danyang Geopark (where various rock types are distributed) and analyzed the mechanical and hydraulic characteristics of landslide materials using a series of laboratory tests. Debris flows occurred in areas of limestone/marble, shale, and porphyroblastic gneiss, and limestone/marble landslides were distinguished from the others through the presence of karren topography. Soil tests showed that soil derived from weathered gneiss, which has a higher proportion of coarse grains, has a higher friction angle, lower cohesion, and larger hydraulic conductivity than soils from areas of limestone/marble, and shale. Rock failure mass movements occurred in areas of phyllite, sandstone, and conglomerate and were subdivided into plane failure, block-fall, and boulder-fall types in areas of phyllite, sandstone, and conglomerate, respectively. The shear strength of phyllite is much lower than that of the other types of rock, which have similar rock quality. The slake durability index of the conglomerate is similar to that of the other rock types, which have similar degrees of weathering, but differential weathering of the matrix and clasts was clearly observed when comparing the samples before and after the test. This study can help establish appropriate reinforcement and disaster prevention measures, which depend on the type of mass movement expected given the geological characteristics of an area.