학술논문

Breakdown Characteristics of a Fluoronitrile Mixture Gas According to Mixing Ratio and Oxygen Content for High-Voltage Power Equipment Application
Document Type
Periodical
Source
IEEE Access Access, IEEE. 12:16117-16126 2024
Subject
Aerospace
Bioengineering
Communication, Networking and Broadcast Technologies
Components, Circuits, Devices and Systems
Computing and Processing
Engineered Materials, Dielectrics and Plasmas
Engineering Profession
Fields, Waves and Electromagnetics
General Topics for Engineers
Geoscience
Nuclear Engineering
Photonics and Electrooptics
Power, Energy and Industry Applications
Robotics and Control Systems
Signal Processing and Analysis
Transportation
Fluorine compounds
Climate change
Mixture models
High-voltage techniques
Breakdown voltage
Electric fields
Dielectric breakdown
Sulfur hexafluoride
Lightning
Insulation
Global warming
Oxygen
Fluoronitrile mixture gas
mixing ratio
oxygen content
extremely and weakly non-uniform electric fields
breakdown
high-voltage power equipment
Language
ISSN
2169-3536
Abstract
Fluoronitrile (C4F7N) has many advantages, such as high dielectric strength, low global warming potential (GWP), and short atmospheric lifetime compared to sulfur hexafluoride (SF6). C4F7N is mixed with carbon dioxide (CO2) to prevent liquefaction at the operating pressure of high-voltage power equipment. Therefore, it is essential to investigate the dielectric characteristics of the C4F7N/CO2 mixture gas for the development of environmentally friendly power equipment. The dielectric characteristics of C4F7N/CO2 at lower pressures have been previously reported. However, research into the breakdown characteristics of C4F7N/CO2 under high pressure environments is insufficient. Furthermore, the effect of oxygen (O2) content contributing to suppression of carbon soot formation by arc on breakdown characteristics of C4F7N/CO2 has rarely been investigated. Therefore, in this paper, the breakdown characteristics of C4F7N/CO2 according to the mixing ratio and O2 content were investigated while considering a high–pressure environment. The electrode arrangements were determined based on the field utilization factor in order to consider two types of electric field distribution. Alternating current (AC) and negative lightning impulse (-LI) breakdown tests were performed. From these experiments, under an extremely non-uniform electric field, it was confirmed that the dielectric strength of C4F7N 5%/CO2 95% at high pressure was about 75% of the strength of SF6. In a weakly non-uniform electric field, increasing the C4F7N content contributed to the improvement of dielectric strength by 31-77% relative to pure CO2 at the high pressure. Furthermore, it was investigated that the presence of O2 had no significant influence on improving the insulation performance.