부산대학교 도서관

Arc suppression Snubbers offer safety in high energy superconducting magnet systems. Large superconducting magnets may have arcing across their breakers at the moment of slow dump initiation resulting from a sudden current redistribution in the powering circuit. The ATLAS Experiment at CERN experiences such arcing with its 7.3 H Toroidal magnet powering circuit. To discharge the magnets, the current is redistributed to a parallel branch called the Run Down Unit (RDU) by means of a breaker. Due to the physical layout and other metallic components in the vicinity, the power supply and RDU branches have undesirable and unavoidable parasitic inductance, causing a voltage spike over the main breakers at the moment of opening. The resulting arcing deteriorates the breaker contacts, resulting in increased operating temperatures and a more frequent need for maintenance. The arc suppression system developed takes the form of an RC Snubber (Resistor-Capacitor). The Snubber offers the current a low-impedance path, thus smoothing out the current redistribution and suppressing the voltage spike. This initial charging period of the capacitors gives the current enough time to overcome the parasitic inductance, therefore allowing the RDU to smoothly ramp up without a sudden voltage spike. To test the concept, a 1/50th scale demonstrator was developed and showed successful results. After the demonstrator, endurance testing of the electrolytic capacitors was performed to ensure no degradation of the charging characteristics for an equivalent of 20 years of operation. The Snubber was manufactured and implemented with successful results on the ATLAS Toroidal powering circuit.