부산대학교 도서관

This study is the first, to the best of our knowledge, where waste napkin paper was successfully valorized to low-density (27.2 mg cm−3) cellulose aerogels for oil sorption material. Two simple methods with different gel coagulators, ethanol and sulfuric acid, were used for preparation of the aerogel. Conditions for the alkaline treatment of the raw material and the pre-freezing temperature in the lyophilization process were optimized. It was found that the water and oil sorption capacities of the aerogels were not significantly affected by alkaline treatment, while they could be adjusted by changing the pre-freezing temperature. Although the produced aerogels were initially amphiphilic, hydrophobic surfaces were obtained by vapor deposition of methyltrimethoxysilane (MTMS) and these materials possessed high sorption capacities, up to 32.24 cm3 g−1 (28.56 g g−1) for pump oil and 26.77 cm3 g−1 (39.59 g g−1) for chloroform. This was comparable to aerogels prepared from fresh cellulosic materials via the sol-gel method, as their sorption capacities varied in the range of 14–45 g g−1.