부산대학교 도서관

The aim of this research was to investigate the effect of sintering additive and relatively low‐sintering temperature on the thermal conductivity of aluminum nitride nanoceramic. While using nanosized AlN powder and liquid‐phase sintering additives, the various sintering processes were performed at temperatures 1400 and 1500°C for several hours. In the analysis methods, thermal conductivity (K) and thermal diffusivity (α) were measured using thermal conductivity analyzer (Hot Disk), scanning electron microscope (SEM) was used to observe the surface morphology of the microstructure, x‐ray diffraction analyzer (XRD) to analyze the grain size and crystal structure, Raman spectroscopy (Raman) emission spectrum was analyzed to identify the material microstructure and the densities of AlN specimens were measured by Archimedes method. It was found that the thermal conductivity is related to the densification of nanosize low‐temperature sintered material, which can be controlled by additives and sintering temperature. With Y2O3 sintering add, the densification of AlN for low‐temperature sintering increased by the factor of ～5% to ～12%, and the thermal conductivity was enhanced by 25%. The relative density observed in this research is about 78%‐84%, and the thermal conductivity measured is in the range of 9‐14 W/mK. [ABSTRACT FROM AUTHOR]