부산대학교 도서관

Recently, robots have been required to inspect the insides of nuclear reactors under high temperature and radiation flux conditions. In a FBR (fast breeder reactor), the viewing system of the robot is particularly important because the reactor vessel of the FBR is filled with opaque liquid sodium. To drive this robot, servomotors must meet special requirements. At temperatures above 220°C, the integrity of organic materials cannot be maintained for long periods. In addition, the air-gap length of the motor varies, because metals expand at high temperatures. Thus, the characteristics of induction motors with an air-gap length of 0.2–0.4 mm may vary. Furthermore, the rotor may come into contact with the stator. In this paper, a newly developed permanent magnet motor which can withstand high temperatures and radiation is presented, and the characteristics of the rotor at high temperatures are discussed. Coils for winding ceramic magnetic wires are installed in the stator and Sm2Co17 permanent magnets are embedded in the rotor yoke. This motor is suitable for use at up to 400°C due to the use of inorganic materials in it. In addition, the permanent magnet motor can incorporate a long air-gap length, which has little effect on the characteristics of the motor. The test results show that the motor has excellent characteristics at high temperature. © 1997 Scripta Technica, Inc. Electr Eng Jpn, 119(4): 52–65, 1997 [ABSTRACT FROM AUTHOR]