부산대학교 도서관

During recent years, coronary bypass surgery has progressed toward minimizing invasiveness. One important feature of this approach is performing surgery on a beating heart. During the crucial phase of such surgery, the mechanical support of the heart with a left ventricular assist device (LVAD) is a possible option. During the period from October 1, 1994 until June 30, 1997, we employed a centrifugal pump system in 118 cases of coronary artery bypass graft (CABG) procedures with LVAD support (mechanically supported CABG[SUPPCAB]). A total of 179 distal anastomoses with an average of 1.5 ± 0.5 coronary anastomoses per patient was performed. Three types of pumps were used: 23 BioPump, 87 Isoflow, and 8 Capiox systems. The median time on mechanical support was 44 min (range, 16-116 min). The mean flow rate during support time was 3.5 ± 0.8 L/min, which results in a calculated flow of 1.7 ± 0.6 L/min/m body surface area (BSA). The average flow was 3.2 ± 0.8 L/min with the BioPump and 3.7 ± 0.8 L/min with the Isoflow pump, respectively (p < 0.01). The mean arterial pressure during mechanical support was 75 ± 12 mm Hg. In 2 patients, the pump system was kept running postoperatively in the ICU. Eight of the patients received operations under resuscitation or in cardiogenic shock. Nine (7.9%) of the patients did not survive the early postoperative phase. For coronary revascularization of the anterolateral and diaphragmatic parts of the heart, the SUPPCAB procedure is feasible with excellent mechanical support of the heart by centrifugal pumps. Especially in high risk cases, this procedure can be recommended.