학술논문
100MPa급 초고강도 원심성형 콘크리트의 내구성 평가를 위한 실험연구
Experimental Study to Evaluate the Durability of 100 MPa Class Ultra-high Strength Centrifugal Molding Concrete
Experimental Study to Evaluate the Durability of 100 MPa Class Ultra-high Strength Centrifugal Molding Concrete
Document Type
Article
Author
Source
한국구조물진단유지관리공학회 논문집(KSMI) / Journal of The Korea Institute for Structural Maintenance and Inspection (J. Korea Inst. Struct. Mai. Feb 28, 2024 28(1):12
Subject
Language
Korean
English
English
ISSN
2234-6937
Abstract
본 연구에서는 원심성형 기법을 이용하여 구조용 콘크리트 각형보를 개발하였으며, 단면의 휨강성을 확보하기 위하여 단면의 중공률은 10 %이하로 하며 이를 위하여 기존의 빈배합상태의 콘크리트가 아닌 고슬럼프(150∼200)의 물성을 갖으며 설계강도가 100 MPa이상인 콘크리트 배합비를 개발하여 적용하였다. 피암터널이나 라멘소교량의 상부구조로 활용될 원심성형 PSC 각형보의 내구성을 조사하기 위하여 압축\강도 100 MPa급 초고강도 원심성형 콘크리트의 열화 및 내화학적 특성에 대한 내구성능을 평가하였다. 2022년과 2023년에 제작한 원심성형 각형보 시험체에 대하여 염화물침투 저항성, 촉진탄산화, 황산염침식 저항성, 동결융해 저항성, 스케일링 저항성 등 콘크리트의 내구성 시험을 수행하였다. 본 연구에서 검증한 내용을 고려해 볼 때 추후 제작단계에서 수밀성이 높아지는 원심성형 콘크리트의 내구성은 일반적인 콘크리트에 비해 우수한 것으로 조사되었다.
In this study, a structural concrete square beam was developed using the centrifugal molding technique. In order to secure the bending stiffness of the cross section, the hollow rate of the cross section was set to 10% or less. Instead of using the current poor mixture of concrete and a concrete mixing ratio with a high slump (150-200) and a design strength of 100 MPa or more was developed and applied. In order to investigate the durability of centrifugally formed PSC square beams to be used as the superstructure of the avalanch tunnel or ramen bridge, the durability performance of ultra-high-strength centrifugally formed concrete with a compressive strength of 100 MPa was evaluated in terms of deterioration and chemical resistance properties. Concrete durability tests, including chloride penetration resistance, accelerated carbonation, sulfate erosion resistance, freeze-thaw resistance, and scaling resistance, were performed on centrifugally formed square beam test specimens produced in 2022 and 2023. Considering the information verified in this study, the durability of centrifugally molded concrete, which has increased watertightness in the later manufacturing stage, was found to be superior to that of general concrete.
In this study, a structural concrete square beam was developed using the centrifugal molding technique. In order to secure the bending stiffness of the cross section, the hollow rate of the cross section was set to 10% or less. Instead of using the current poor mixture of concrete and a concrete mixing ratio with a high slump (150-200) and a design strength of 100 MPa or more was developed and applied. In order to investigate the durability of centrifugally formed PSC square beams to be used as the superstructure of the avalanch tunnel or ramen bridge, the durability performance of ultra-high-strength centrifugally formed concrete with a compressive strength of 100 MPa was evaluated in terms of deterioration and chemical resistance properties. Concrete durability tests, including chloride penetration resistance, accelerated carbonation, sulfate erosion resistance, freeze-thaw resistance, and scaling resistance, were performed on centrifugally formed square beam test specimens produced in 2022 and 2023. Considering the information verified in this study, the durability of centrifugally molded concrete, which has increased watertightness in the later manufacturing stage, was found to be superior to that of general concrete.