부산대학교 도서관

−In this paper, knocking combustion in dual-fuel diesel engine is modeled and investigated using the CFD code coupled with detailed chemical kinetics. The ethanol/gasoline blend E85 is used as the primary fuel in a dual-fuel combustion concept based on a light-duty diesel engine equipped with a common-rail injection system. The E85 blend is injected and well mixed with intake air in the intake manifold and is ignited by the direct injection diesel fuel. A 46-species, 187-reaction Multicomponent mechanism is adopted to model the auto-ignition process of the E85/air/diesel mixture ahead of the flame front. Based on the model validation, knocking combustion under boost and full load operating condition for 0 %, 20 %, 50 %, as well as 70 % E85 substitute energy is simulated. The effects of E85 substitute rate and two stage injection strategies on knock intensity, power output, as well as location of the auto-ignition initiation is clearly reproduced by the model. The calculation result shows that, for a high E85 rate of 50 % and 70 % with single injection strategies, the most serious knock and the origin of auto-ignition always occurs far away from where the flame of diesel spray is first generated, at the center of combustion chamber, due to higher pressure wave, relatively richer E85 mixture and longer distances of flame propagation. The two stage injection strategies with a small amount of diesel pilot injection ahead of the main injection primarily influence the ignition behavior of the directly injected fuel, leads to a lower pressure rise rate and a reduced propagation distance, both of which contribute to the attenuation of knock intensity for a higher E85 rate.