학술논문

Measurements of the transverse wakefields due to varying collimator characteristics
Document Type
Conference
Source
2007 IEEE Particle Accelerator Conference (PAC) Particle Accelerator Conference, 2007. PAC. IEEE. :4207-4209 Jun, 2007
Subject
Fields, Waves and Electromagnetics
Engineered Materials, Dielectrics and Plasmas
Nuclear Engineering
Robotics and Control Systems
Collimators
Geometry
Energy measurement
Testing
Predictive models
Position measurement
Impedance
Contracts
Apertures
Data analysis
Language
ISSN
1944-4680
2152-9582
Abstract
We report on measurements of the transverse wakefields induced by collimators of differing characteristics. An apparatus allowing the insertion of different collimator jaws into the path of a beam was installed in End Station A (ESA) in SLAC. Eight comparable collimator geometries were designed, including one that would allow easy comparison with previous results, and were installed in this apparatus. Measurements of the beam kick due to the collimator wakefields were made with a beam energy of 28.5 GeV, and beam dimensions of 100 microns vertically and a range of 0.5 to 1.5 mm longitudinally. The trajectory of the beam upstream and downstream of the collimator test apparatus was determined from the outputs of ten BPMs (four upstream and six downstream), thus allowing a measurement of the angular kick imparted to the beam by the collimator under test. The transverse wakefield was inferred from the measured kick. The different aperture designs, data collection and analysis, and initial comparison to theoretical and analytic predictions are presented here.