부산대학교 도서관

A signal processing technique is presented for determining the composition of multiphase oil–water–gas flow in a pipe using noninvasive ultrasonic speed of sound measurements from a transmitter–receiver pair bonded to diametrically opposite sides of a pipe. A linear chirp excitation is used to send broadband ultrasonic energy that propagates in two paths from transmitter to receiver such as: 1) a wave through the pipe wall and then the multiphase mixture and 2) ultrasonic guided waves along the pipe wall in the circumferential direction. As the ultrasonic attenuation of the multiphase mixture increases, the amplitude of the signal through the fluid mixture decreases relative to that of circumferential guided waves, making it difficult to determine the time of arrival of the fluid-path signal and, hence, the speed of sound in the mixture. The proposed signal processing technique overcomes this challenge by using: 1) a guided wave subtraction approach to suppress the strength of guided wave signals relative to the fluid-path signal and 2) a Gaussian reconstruction approach for synthetic enhancement of the fluid-path signal by output signal reconstruction at frequencies corresponding to peak transmission of ultrasonic energy. The efficacy of the technique is demonstrated using experiments carried out in a field-scale flow loop with varying compositions of oil–water–gas mixtures. It is shown that the proposed approach can enhance the signal detectability by approximately 20 dB in comparison with the traditional approach that does not utilize guided wave subtraction and also improves the gas tolerance of composition measurements up to 20% in gas volume fraction.