학술논문

Cascaded Rectifiers for Energy Harvesting With a Wide Dynamic Power Range
Document Type
Periodical
Source
IEEE Journal of Radio Frequency Identification IEEE J. Radio Freq. Identif. Radio Frequency Identification, IEEE Journal of. 7:64-73 2023
Subject
Fields, Waves and Electromagnetics
Communication, Networking and Broadcast Technologies
Signal Processing and Analysis
Radio frequency
Rectifiers
HEMTs
Switches
Logic gates
Dynamic range
Power measurement
Energy harvesting
Harmonic analysis
harmonic balance
HEMT
nonlinear simulation
radiofrequency
rectifier
Language
ISSN
2469-7281
2469-729X
Abstract
This work presents a novel RF energy harvesting system at 2.45 GHz, operating over a wide dynamic RF range (44 dB), starting from ultra-low power. It consists of three rectification branches, each one optimized for a selected power interval, between $- 20\,\,\div \,\,+$ 24 dBm. Through an automatic distribution network, the incident RF power is routed to the most efficient rectification branch, with no need for external control circuits. The first branch is optimized for low-power conditions, in the range $- 20\,\,\div \,\,0$ dBm, and the second and third branches for 0 $\div $ 9 dBm and $9~\div ~24$ dBm, respectively. For branch decoupling, an original strategy, based on the concurrent nonlinear design of power-dependent matching networks and self-powered switches, is used. To maximize each rectifier performance, Enhancement-mode High Electron Mobility transistors (HEMT) are adopted by means of the self-biasing mechanism. In this way, for any possible incoming RF power, only the most suitable rectifier path is active and the maximum RF-to-dc conversion efficiency is preserved. The system has been fabricated and tested demonstrating a conversion efficiency higher than 30% from −13 dBm to 24 dBm, with the lowest and highest measured dc output voltage of 0.1 and 13 V, respectively.