학술논문

CMOS-MEMS Accelerometer With Stepped Suspended Gate FET Array: Design & Analysis
Document Type
Periodical
Source
IEEE Transactions on Electron Devices IEEE Trans. Electron Devices Electron Devices, IEEE Transactions on. 68(10):5133-5141 Oct, 2021
Subject
Components, Circuits, Devices and Systems
Engineered Materials, Dielectrics and Plasmas
Electrodes
Logic gates
Micromechanical devices
Accelerometers
Force
Electrostatics
Air gaps
Accelerometer
electrostatic microelectromechanical systems (MEMS)
pull-in instability
pull-in voltage
stable driving range
stepped suspended gate field-effect transistor (SGFET)
Language
ISSN
0018-9383
1557-9646
Abstract
This article presents a novel stepped suspended gate field-effect transistor (SSGFET) array-based ${z}$ -axis accelerometer with an enhanced detection range. The stepped gate electrode structure of SGFET aids in extending the stable driving range beyond 33.33% of the initial air gap. The stable driving range is extended to 50% of the initial air gap with ~90% increase in the pull-in voltage. Mechanical, electrical, and electromechanical analytical models are developed. These models are validated through microelectromechanical systems (MEMS) simulations using CoventorMP and transistor simulations in Synopsys TCAD. An SSGFET-based common source (CS) amplifier with diode-connected p-MOSFET load is designed and simulated in Cadence Virtuoso using the lookup table (LUT) approach. The $z$ -axis accelerometer exhibits a sensitivity of 38 (mV/g) with a supply voltage of 3.3 V for a dynamic range (DR) of ±6 g with the nonlinearity of about 5.3% comparedtoSGFETswith a planar gate electrode,whichcan detect up to ±4 g with the same sensitivity. The 3-dB bandwidth of the accelerometer is 412 Hz with a noise-limited resolution of 109.31 $\mu$ g/(Hz) 1/2 . This article also presents a detailed analysis of the relation between the number of gate fragments, the pull-in voltage, stable driving range, and the DR along with a feasible fabrication integration plan.