학술논문

Channel Interpolation of Fading Channels and the Pilot Density Required for Predictor Antennas
Document Type
Periodical
Source
IEEE Transactions on Vehicular Technology IEEE Trans. Veh. Technol. Vehicular Technology, IEEE Transactions on. 73(5):6765-6779 May, 2024
Subject
Transportation
Aerospace
Interpolation
Channel estimation
Antenna measurements
Antennas
Delays
Fading channels
Time measurement
Channel interpolation
channel prediction
Channel state information (CSI)
Predictor antenna
spline interpolation
Language
ISSN
0018-9545
1939-9359
Abstract
Predictor antennas (PAs) are a potential solution to severe channel aging that can occur at high vehicular velocities in non line-of-sight (NLOS) environments. Channel aging reduces the performance of many advanced communication schemes based on channel state information at the transmitter (CSIT). Although PAs have been shown to work in combination with dense pilots in time and space, prediction performance can be reduced when channel estimates are sparse. This paper answers how densely pilots must be placed for PAs to be feasible when performing basic interpolation between channel estimates. This is important, especially for establishing upper limits on the length of the downlink (DL) frames required in a time-division duplex (TDD) system with PAs. Nearest-neighbor, linear, and spline interpolation are analyzed when applied to stochastic radio channels. A theoretical expression is derived for the power of the expected interpolation error for any interpolation method that can be expressed as a linear function of a set of measured values. The interpolation methods are evaluated on three theoretical channels with Rayleigh, flat, and Rician fading, and on two sets of channel measurements. The results indicate that linear and spline interpolation can be used with down to five and three samples per wavelength, respectively, without affecting the PA-based prediction NMSE. At two samples per wavelength, the prediction NMSE is still at a level that can be useful for precoding design in massive multiple-input multiple-output (M-MIMO) systems.