학술논문
Bonding through novel solder-metallic mesh composite design
Document Type
article
Source
Materials & Design, Vol 160, Iss , Pp 475-485 (2018)
Subject
Language
English
ISSN
0264-1275
Abstract
Thin metallic Cu and Ni meshes were successfully embedded within SAC305 solder joints. Defects (residues) within the joint were removed by a vacuum step in the bonding sequence. The metallic mesh inlets were metallurgically bonded by the formation of scallop-like Cu6Sn5 and faceted Ni3Sn4 intermetallic compounds (IMCs) at the Cu mesh-SAC305 solder (CMS) and Ni mesh-SAC305 solder (NMS) interfaces, respectively. After process optimization, the averaged shear strengths were found to be 44.1 (reference), 44.7 (+1%), and 51.4 MPa (+16%) for SAC305, NMS, and CMS composite joints, respectively. The solder-substrate-mesh interaction resulted in a characteristic fracture pattern, with the cracking path partly within the solder and partly at the solder-mesh interface. Finite element (FE) simulations suggested a mesh-induced stiffening effect of the solder joint by 5%. The additional reinforcement (11%) introduced by the Cu mesh inlets was attributed to a locally enhanced fracture resistance. Keywords: Solder-mesh composite joints, Microstructure, Shear strength, Finite element modeling, Fracture