부산대학교 도서관

The aim of this study is to determine and compare the adsorption capacities, kinetic and thermodynamic parameters of the adsorption process of uranyl ions from aqueous solution on nanotube titania impregnated mesoporous silica SBA-15 (TNT-SBA-15) and naked SBA-15 (nSBA-15) adsorbents. The TNT-SBA-15 composite containing various molar ratio of nanotube titania to silica (TNT-SBA-15(m:n)) in the matrix was synthesized by the sol–gel/impregnation method using sodium silicate as a silica precursor, sulphuric acid and nanotube titania. Batch adsorption experiments showed that the maximum adsorption capacity (qmax) of the TNT-SBA-15(m:n = 1:1) composite under indoor light be as high as 2.65 mMoleU g−1 that was 1.4 times higher than that of nSBA-15 under the same conditions. Under UV (300 W) illumination the qmax of TNT-SBA-15(1:1) adsorbent reached 3.49 mMoleU g−1 that was 2 times higher than the qmax in the dark. The increase in qmax of the TNT-SBA-15(1:1) composite in the two experiments was attributed to the synergistic effect of coupled sorption and photocatalytic reduction of U(VI) by titania following the deposition of uranium (IV) (hydr)oxide on the surface of the adsorbent. The adsorption process followed a pseudo-second kinetic model. The activation energy was found to be 160 and 135 kJ Mole−1 for the adsorption on nSBA-15 and TNT-SBA-15(1:1), respectively. The isotherm of the adsorption process follows the Langmuir as well as Freundlich models. The adsorption is an endothermic and spontaneous process. Adsorbed TNT-SBA-15 can be easily regenerated in 0.3 M HNO3 solution, and the qmax of the adsorbent was maintained at 95% the initial qmax after three consecutive adsorption–desorption cycles. These results revealed that, though TNT-SBA-15 made from inexpensive reagents could be an effective adsorbent for uranyl removal from wastewater.