학술논문
Optical Transparent and Hydrophobic Properties of TEOS/OTES Hybrid Materials by Sol-Gel Processing
Document Type
Article
Source
Key Engineering Materials; April 2019, Vol. 798 Issue: 1 p134-139, 6p
Subject
Language
ISSN
10139826; 16629795
Abstract
The objective of this project was to develop the hydrophobic film for self-cleaning glasses. The effects of octyltriethoxysilane (OTES) additions to hydrolysis of tetraethylorthosilicate (TEOS) on hydrophobic and optically transparent properties were studied. The film was prepared by sol-gel method from the precursors namely, TESO, OTES, isopropanol alcohol (IPA), and deionized water (DI). The sols for coating were obtained with TEOS/OTES ratio of 50:50 to 99:1. The sols were deposited on a commercial glass and dried at 60oC for an hour. After drying, the film properties were characterized by fourier transform infrared spectroscopy (FTIR), UV-VIS Spectrophotometer, x-Ray Diffractometer (XRD), atomic force microscope (AFM), optical microscopy and contact angle meter. It was found that contact angles of the hybrid films increased with the OTES addition, reaching a maximum at 10 wt.%, and the contact angle values were the same as for further addition. The light transmittance was rather stable with increasing amounts of OTES. For the optimized condition, the water contact angle of 108o and light transmittance of 91%, was obtained with TEOS/OTES ratio of 90:10.