부산대학교 도서관

Abstract: Isotopic ratios of 14C at natural levels can be efficiently measured with accelerator mass spectrometry (AMS). In compact AMS systems, 13CH and 12CH2 molecular interferences are destroyed in collisions with the stripper gas, a process which can be described by dissociation cross sections. These dissociation cross sections determine the gas areal density required for sufficient attenuation of the interfering molecular beams, and are therefore key parameters in the effort to further reduce the terminal voltage and thus the size of the AMS system. We measured the dissociation cross sections of 13CH and 12CH2 in N2 and He in the energy range of 80–250keV. In N2, cross sections were constant for energies above 100keV with average values per molecule of (8.1±0.4)×10−16 cm2 for 13CH and (9.5±0.5)×10−16 cm2 for 12CH2. In He, cross sections were constant over the full measured range of 80–150keV with average values of (4.2±0.3)×10− 16 cm2 and (4.8±0.4)×10−16 cm2, respectively. A considerable reduction of the terminal voltage from the currently used 200kV while using N2 for 13CH and 12CH2 molecule dissociation is not possible: the required N2 areal densities of ∼1.4μg/cm2, consequential angular straggling and a decreasing 1+ charge state fraction would reduce the ion beam transmission too much. This is not the case for He: sufficient molecule dissociation can be obtained with gas densities of ∼0.4μg/cm2, for which angular straggling is relatively small. In addition, the 1+ charge state fraction still increases at lower stripping energies. Thus, the usage of He for stripping and molecule dissociation might allow the development of even smaller 14C-AMS systems than available today. [Copyright &y& Elsevier]