부산대학교 도서관

[Display omitted] • As received furfural contains acids that deactivate mixed oxides basic sites. • Furfural distillation helps to decrease its acidity and thus improves its conversion. • Different furfurals exhibit different response to distillation treatment. • The routine storage of the distilled furfural results in its fast re-oxidation. • Acids in furfural are not the only cause of mixed oxide catalyst deactivation. Aldol condensation of furfural and acetone is often used as a model reaction to test acid-base properties of solid catalysts. The present study describes the effect of furfural acidity on the catalytic performance of MgAl mixed oxides. Three furfural sources differing in their acidity were used and compared in aldol condensation at T = 55 °C and acetone to furfural molar ratio of 10. The furfural conversion over MgAl mixed oxides depended on the acidity of the furfural source, and the catalysts were partially consumed for neutralization of acid admixtures present in furfural. Only for some furfurals could the furfural conversion be improved by distilling the as-received furfural prior to the aldol condensation experiments. Moreover, the storage of the freshly distilled furfural during a few days, even in a closed flask and at a dark place, resulted in a substantial decrease in furfural conversion in aldol condensation. The results indicate that the distillation of the as-received furfural is an effective method to control the performance of basic catalysts at comparable reaction conditions only for some furfurals. Furthermore, the storage of the freshly distilled furfural has to be performed with care to avoid its re-oxidation. [ABSTRACT FROM AUTHOR]