부산대학교 도서관

7A85-T74 forged aluminum alloy was chosen as the experimental material, and the microstructure, tensile properties and impact energy of the alloy were investigated after 5 h of thermal exposure at room temperature to 240℃. The mechanism of the influence of the microstructure on the mechanical properties of 7A85-T74 aluminum alloy was also analyzed by transmission electron microscopy. The results show that the grain size of 7A85-T74 aluminum alloy does not change much in the temperature range of 80-240℃, but the precipitation phase changes significantly with the increase of temperature. Below 120℃, the precipitate size, tensile properties and impact absorption energy do not change significantly with increasing thermal exposure temperature, and the precipitation strengthening mechanism is a mixture of dislocation cutting precipitates and dislocation bypassing precipitates. With the increase of the thermal exposure temperature from 120℃ to 240℃, the precipitate average radius increases from 3.8 nm at room temperature to 12.3 nm, and the precipitate changes from η' phase to η phase. The yield strength and tensile strength of the alloy decrease significantly by 45.7% and 33.5% respectively compared with that of room temperature and the elongation, reduction of area and impact energy of the alloy increase significantly. The precipitation strengthening mechanism changes to dislocation bypassing precipitates, and the fracture mode changes from mixed fracture consisting of intergranular fracture and dimple transgranular fracture to dimple transgranular fracture. The effect of precipitate size on the strength and impact energy of the alloy discusses based on the precipitation strengthening theory, and the results of the theoretical analysis are consistent with the experimental results.