학술논문

A 3-D High-Frequency Array Based 16 Channel Photoacoustic Microscopy System for In Vivo Micro-Vascular Imaging
Document Type
Periodical
Source
IEEE Transactions on Medical Imaging IEEE Trans. Med. Imaging Medical Imaging, IEEE Transactions on. 28(8):1190-1197 Aug, 2009
Subject
Bioengineering
Computing and Processing
In vivo
Optical arrays
Visualization
Electron microscopy
Neodymium
Laser excitation
Tunable circuits and devices
Fiber lasers
Pump lasers
Transducers
High-frequency ultrasound
multichannel receiver electronics
photoacoustic imaging
transducer array
Language
ISSN
0278-0062
1558-254X
Abstract
This paper discusses the design of a novel photoacoustic microscopy imaging system with promise for studying the structure of tissue microvasculature for applications in visualizing angiogenesis. A new 16 channel analog and digital high-frequency array based photoacoustic microscopy system (PAM) was developed using an Nd:YLF pumped tunable dye laser, a 30 MHz piezo composite linear array transducer, and a custom multichannel receiver electronics system. Using offline delay and sum beamforming and beamsteering, phantom images were obtained from a 6 $\mu{\hbox {m}}$ carbon fiber in water at a depth of 8 mm. The measured $-6~{\rm dB}$ lateral and axial spatial resolution of the system was $100\pm 5~\mu{\hbox {m}}$ and $45\pm 5~\mu{\hbox {m}}$, respectively. The dynamic focusing capability of the system was demonstrated by imaging a composite carbon fiber matrix through a 12.5 mm imaging depth. Next, 2-D in vivo images were formed of vessels around 100 $\mu{\hbox {m}}$ in diameter in the human hand. Three-dimensional in vivo images were also formed of micro-vessels 3 mm below the surface of the skin in two Sprague Dawley rats.