학술논문

Quench propagation and protection analysis of the ATLAS Toroids
Document Type
Periodical
Source
IEEE Transactions on Applied Superconductivity IEEE Trans. Appl. Supercond. Applied Superconductivity, IEEE Transactions on. 10(1):365-368 Mar, 2000
Subject
Fields, Waves and Electromagnetics
Engineered Materials, Dielectrics and Plasmas
Superconducting magnets
Solenoids
Magnetic analysis
Superconducting coils
Magnetic separation
Toroidal magnetic fields
Power supplies
Power system protection
Event detection
Computational modeling
Language
ISSN
1051-8223
1558-2515
2378-7074
Abstract
The ATLAS superconducting magnet system consists of the Barrel Toroid, two End Cap Toroids and the Central Solenoid. However, the Toroids of eight coils each are magnetically separate systems to the Central Solenoid. The Toroids are electrically connected in series and energized by a single power supply. The quench protection system is based on the use of relatively small external dump resistances in combination with quench-heaters activated after a quench event detection to initiate the internal dump of stored energy in all the coils. A rather strong quench-back effect due to eddy-currents in the coil casings at the transport current decay is beneficial for the quench protection efficiency in the event of heater failures. The quench behaviour of the ATLAS Toroids was computer simulated for normal operation of the quench protection system and its complete non-operation (failure) mode.