학술논문


EBSCO Discovery Service
발행년
-
(예 : 2010-2015)
전자자료 공정이용 안내

우리 대학 도서관에서 구독·제공하는 모든 전자자료(데이터베이스, 전자저널, 전자책 등)는 국내외 저작권법과 출판사와의 라이선스 계약에 따라 엄격하게 보호를 받고 있습니다.
전자자료의 비정상적 이용은 출판사로부터의 경고, 서비스 차단, 손해배상 청구 등 학교 전체에 심각한 불이익을 초래할 수 있으므로, 아래의 공정이용 지침을 반드시 준수해 주시기 바랍니다.

공정이용 지침
  • 전자자료는 개인의 학습·교육·연구 목적의 비영리적 사용에 한하여 이용할 수 있습니다.
  • 합리적인 수준의 다운로드 및 출력만 허용됩니다. (일반적으로 동일 PC에서 동일 출판사의 논문을 1일 30건 이하 다운로드할 것을 권장하며, 출판사별 기준에 따라 다를 수 있습니다.)
  • 출판사에서 제공한 논문의 URL을 수업 관련 웹사이트에 게재할 수 있으나, 출판사 원문 파일 자체를 복제·배포해서는 안 됩니다.
  • 본인의 ID/PW를 타인에게 제공하지 말고, 도용되지 않도록 철저히 관리해 주시기 바랍니다.
불공정 이용 사례
  • 전자적·기계적 수단(다운로딩 프로그램, 웹 크롤러, 로봇, 매크로, RPA 등)을 이용한 대량 다운로드
  • 동일 컴퓨터 또는 동일 IP에서 단시간 내 다수의 원문을 집중적으로 다운로드하거나, 전권(whole issue) 다운로드
  • 저장·출력한 자료를 타인에게 배포하거나 개인 블로그·웹하드 등에 업로드
  • 상업적·영리적 목적으로 자료를 전송·복제·활용
  • ID/PW를 타인에게 양도하거나 타인 계정을 도용하여 이용
  • EndNote, Mendeley 등 서지관리 프로그램의 Find Full Text 기능을 이용한 대량 다운로드
  • 출판사 콘텐츠를 생성형 AI 시스템에서 활용하는 행위(업로드, 개발, 학습, 프로그래밍, 개선 또는 강화 등)
위반 시 제재
  • 출판사에 의한 해당 IP 또는 기관 전체 접속 차단
  • 출판사 배상 요구 시 위반자 개인이 배상 책임 부담
'학술논문' 에서 검색결과 1,151,450건 | 목록 1~20
The fascicules of Roman York (Eboracum) - 3/1: J. B. WHITWELL , THE CHURCH STREET SEWER AND AN ADJACENT BUILDING (1976) £3. - 14/1: P. C. BUCKLAND , THE ENVIRONMENTAL EVIDENCE FROM THE CHURCH STREET ROMAN SEWER SYSTEM (1976) £3. - 17/1: A. MacGREGOR , FINDS FROM A ROMAN SEWER AND AN ADJACENT BUILDING IN CHURCH STREET (1976) £3. - 3/2: A. B. SUMPTER AND S. COLL , INTERVAL TOWER SW5 AND THE SOUTH-WEST DEFENCES: EXCAVATIONS 1972-75 (1977) £3. - 4/1: M. CARVER , S. DONAGHEY AND A. B. SUMPTER , RIVERSIDE STRUCTURES AND A WELL IN SKELDERGATE AND BUILDINGS IN BISHOPHILL (1978) £5. - 17/2: A. MacGREGOR , ROMAN FINDS FROM SKELDERGATE AND BISHOPHILL (1978) £3. - 14/2: H. K. KENWARD AND D. WILLIAMS , BIOLOGICAL EVIDENCE FROM THE ROMAN WAREHOUSES IN CONEY STREET (1979) £3. - 14/3: A. R. HALL , H. K. KENWARD AND D. WILLIAMS , ENVIRONMENTAL EVIDENCE FROM ROMAN DEPOSITS IN SKELDERGATE (1980) £3. - 16/2: J. R. PERRIN , ROMAN POTTERY FROM THE COLONIA: SKELDERGATE AND BISHOPHILL (1981) £3. - 6/1: D. BRINKLOW ET AL., CONEY STREET, ALDWARK AND CLEMENTHORPE, MINOR SITES AND ROMAN ROADS (1986) £11.50. - 14/5: H. KENWARD , A. R. HALL AND A. K. G. JONES , ENVIRONMENTAL EVIDENCE FROM A ROMAN WELL AND ANGLIAN PITS IN THE LEGIONARY FORTRESS (1986) £6.50. - 15/2: T. P. O'CONNOR , BONES FROM THE GENERAL ACCIDENT SITE, TANNER ROW (1989) £10. - 16/4: J. R. PERRIN WITH D. F. WILLIAMS , ROMAN POTTERY FROM THE COLONIA 2: GENERAL ACCIDENT AND ROUGIER ST (1990) £15. (All volumes under the editorship of P. V. Addyman)
Academic Journal
Journal of Roman Archaeology. 5:388-394
August 2016 VOLUME 5, ISSUE 8, AUGUST 2016 5th Generation Wi-Fi Shatha Ghazal, Raina S Alkhlailah Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5801 ECG Arrhythmia Detection Using Choi-Williams Time-Frequency Distribution and Artificial Neural Network Sanjit K. Dash, G. Sasibhushana Rao Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5802 Data Security using RSA Algorithm in Cloud Computing Santosh Kumar Singh, Dr. P.K. Manjhi, Dr. R.K. Tiwari Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5803 Detection Algorithms in Medical Imaging Priyanka Pareek, Pankaj Dalal Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5804 A Review Study on the CPU Scheduling Algorithms Shweta Jain, Dr. Saurabh Jain Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5805 Healthcare Biosensors - A Paradigm Shift To Wireless Technology Taha Mukhtar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5806 Congestion Control for Peer to Peer Application using Random Early Detection Algorithm Sonam Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5807 Quantitative and Qualitative Analysis of Milk Parameters using Arduino Controller Y.R. Bhamare, M.B. Matsagar, C.G. Dighavkar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5808 Ardunio Based Security and Safety using GSM as Fault Alert System for BTS (Base Transceiver Station) Umeshwari Khot, Prof. Venkat N. Ghodke Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5809 Automatic Single and Multi Topic Summarization and Evolution to Generate Timeline Mrs. V. Meenakshi, Ms. S. Jeyanthi Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5810 Data Hiding in Encrypted HEVC/AVC Video Streams Saltanat Shaikh, Prof. Shahzia Sayyad Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5811 A Study of Imbalanced Classification Problem P. Rajeshwari, D. Maheshwari Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5812 Design of PTL based Area Efficient and Low Power 4-bit ALU Saraabu Narendra Achari, Mr. C. Pakkiraiah Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5813 The Design of Driver Safety Awareness and Assistance System through Sleep Activated and Auto Brake System for Vehicle Control D. Sivabalaselvamani, Dr. A. Tamilarasi, L. Rahunathan and A.S. Harishankher Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5814 Parameters Selection, Applications & Convergence Analysis of PSO Algorithms Sachin Kumar, Mr. N.K. Gupta Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5815 Effective Pattern Deploying Model for the Document Restructuring and Classification Niketa, Jharna Chopra Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5816 Cataloging Telugu Sentences by Hidden Morkov Techniques V. Suresh Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5817 Biometrics for Cell Phone Safety Jyoti Tiwari, Santosh Kumar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5818 Digital Image Watermarking using Modified DWT&DCT Combination and Bi Linear Interpolation Yannam .Nagarjuna, K. Chaitanya Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5819 Comparative Study and Analysis on the Techniques of Web Mining Dipika Sahu, Yamini Chouhan Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5820 A Review of MIL-STD-1553 Bus Trends and Future K. Padmanabham, Prabhakar Kanugo, Dr. K. Nagabhushan Raju, M. Chandrashekar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5821 Design of QPSK Digital Modulation Scheme Using Turbo Codes for an Air Borne System D. Sai Brunda, B. Geetha Rani Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5822 An Efficient Locally Weighted Spectral Cluster for Automatic Image Segmentation Vishnu Priya M, J Santhosh Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5823 An Efficient Sliding Window Based Micro Cluster Over Data Streams Nancy Mary, A. Venugopal Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5824 Comparative Analysis of Traditional Frequency Reuse Techniques in LTE Network Neelam Rani, Dr. Sanjeev Kumar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5825 Score Level Integration of Fingerprint and Hand Geometry Biometrics Jyoti Tiwari, Santosh Kumar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5826 CHARM: Intelligently Cost and Bandwidth Detection for FTP Servers using Heuristic Algorithm Shiva Urolagin Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5827 Image Enhancement Using Modified Exposure Based Histogram SK. Nasreen, N. Anupama Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5828 Human Gesture Based Recognition and Classification Using MATLAB Suman, Er. Kapil Sirohi Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5829 Image Denoising- A Novel Approach Dipali D. Sathe, Prof. K.N. Barbole Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5830 Design of Low Pass Digital FIR Filter Using Nature Inspired Technique Nisha Rani, Balraj Singh, Darshan Singh Sidhu Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5831 Issues and Challenges in Software Quality Assurance Himangi, Surender singh Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5832 Hybridization of GSA and AFSA to Detect Black Hole Attack in Wireless Sensor Network Soni Rani, Charanjit Singh Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5833 Reversible Watermarking Technique for Data Hiding, Accurate Tamper Detection in ROI and Exact Recovery of ROI Y. Usha Madhuri, K. Chaitanya Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5834 Fault Tolerance and Concurrency Control in Heterogeneous Distributed Database Systems Sagar Patel, Meghna Burli, Nidhi Shah, Prof. (Mrs.) Vinaya Sawant Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5835 Collection of Offline Tamil Handwriting Samples and Database Creation D. Rajalakshmi, Dr. S.K. Jayanthi Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5836 Overview of Renewable Energy in Maharashtra Mr. Sagar P. Thombare, Mr. Vishal Gunjal, Miss. Snehal Bhandarkar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5837 Comparative Analysis of Efficient Image Steganographic Technique with the 2-bit LSB Algorithm for Color Images K. S. Sadasiva Rao, Dr A. Damodaram Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5838 An Efficient Reverse Converter Design for Five Moduli Set RNS Y. Ayyavaru Reddy, B. Sekhar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5839 VLSI Design of Area Efficient High Performance SPMV Accelerator using VBW-CBQCSR Scheme N. Narasimharao, A. Mallaiah Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5840 Customer Retention of MCDR using 3SCDM Approaches Suban Ravichandran, Chandrasekaran Ramasamy Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5841 User Privacy and Data Trustworthiness in Mobile Crowd Sensing Ms. T. Sharadha, Dr. R. Vijaya Bhanu Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5842 A Safe Anti-Conspiracy Data Model For Changing Groups in Cloud G. Ajay Kumar, Devaraj Verma C Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5843 Scope and Adoption of M-Commerce in India Anurag Mishra, Sanjay Medhavi, Khan Shah Mohd, P.C. Mishra Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5844 A Secure Data Hiding Scheme For Color Image Mrs. S.A. Bhavani Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5845 A Study of Different Content Based Image Retrieval Techniques C. Gururaj, D. Jayadevappa, Satish Tunga Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5846 Cache Management for Big Data Applications: Survey Kiran Grover, Surender Singh Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5847 Survey on Energy Efficient Protocols and Challenges in IOT Syeda Butool Fatima, Sayyada Fahmeeda Sultana, Sadiya Ansari Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5848 Educational Data Mining For Evaluating Students Performance Sampreethi P.K, VR. Nagarajan Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5849 Iterative Pareto Principle for Software Test Case Prioritization Manas Kumar Yogi, G. Vijay Kumar, D. Uma Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5850 Localization Techniques in Wireless Sensor Networks: A Review Abhishek Kumar, Deepak Prashar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5851 Ensemble Averaging Filter for Noise Reduction Tom Thomas Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5852 Survey Paper on Get My Route Application Shubham A. Purohit, Tushar R. Khandare, Prof. Swapnil V. Deshmukh Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5853 Design and Implementation of Smart Car with Self-Navigation and Self-Parking Systems using Sensors and RFID Technology Madhuri M. Bijamwar, Prof. S.G. Kole, Prof. S.S. Savkare Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5854 Comparison Study of Induction Motor Drives using Microcontroller and FPGA Sooraj M S, Sreerag K T V Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5855 A Survey on Text Categorization Senthil Kumar B, Bhavitha Varma E Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5856 Multirate Signal Reconstruction Using Two Channel Orthogonal Filter Bank Sijo Thomas, Darsana P Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5857 The Multi-keyword Synonym Search for Encrypted Cloud Data Using Clustering Method Monika Rani H G, Varshini Vidyadhar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5858 A Review on Various Speech Enhancement Techniques Alugonda Rajani, Soundarya .S.V.S Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5859 A Survey on Various Spoofing Attacks and Image Fusion Techniques Pravallika .P, Dr. K. Satya Prasad Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5860 Non-Invasive Vein Detection using Infra-red Rays Aradhana Singh, Dr. S.C. Prasanna Kumar, Dr. B.G. Sudershan Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5861 Boundary-Polygons for Minutiae based Fingerprinst Recognition Kusha Maharshi, Prashant Sahai Saxena Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5862 Image Forgery Detection on Digital Images Nimi Susan Saji, Ranjitha Rajan Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5863 Enhancing Information Security in Big Data Renu Kesharwani Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5864 Secure Multi-Owner Data Sharing for Dynamic Groups in Cloud Ms. Nilophar M. Masuldar, Prof. V. P. Kshirsagar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5865 Compact Microstrip Octagonal Slot Antenna for Wireless Communication Applications Thasneem .H, Midhun Joy Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5866 ‘Aquarius’- Smart IOT Technology for Water Level Monitoring System Prof. A. M. Jagtap, Bhaldar Saniya Sikandar, Shinde Sharmila Shivaji, Khalate Vrushali Pramod, Nirmal Kalyani Sarangdhar Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5867 Future of Results in Select Search Engine Peerzada Mohammad Iqbal, Dr. Abdul Majid Baba, Aasim Bashir Abstract | PDF with Text | DOI: 10.17148/IJARCCE.2016.5868 Semantic Indexing Techniques on Information Retrieval of Web Content
Academic Journal
IJARCCE. 5:347-352
Full Issue Download Vol. 13 No. 1 2021 The Importance of the Measurement Infrastructure in Economic Recovery from the COVID-19 Pandemic Richard J. C. Brown , Fiona Auty, Eugenio Renedo, Mike King NCSLI Measure | Vol. 13 No. 1 (2021) | doi.org/10.51843/measure.13.1.1 Publisher NCSL International | Published February 2021 | Pages 18-21 Abstract: This paper describes the many, evidenced-based benefits to the economy of a well-developed measurement infrastructure. In particular, it explains how assuring confidence in measurement may be used to accelerate economic recovery from the COVID-19 pandemic including in emerging sectors such as the digital economy. Recommendations are made for providing near term support for national economic recovery whilst also demonstrating the advantages of sustained development of the measurement infrastructure in the medium-term to maximize the potential of future innovative and disruptive technologies. These recommendations, whilst focused on consideration of the UK, should apply globally. References: [1] G. Tassey, 'Underinvestment in public good technologies,' J Technol. Transfer, Vol. 30, pp. 89-113, 2004. https://doi.org/10.1007/s10961-004-4360-0 [2] M. King, and E. Renedo, 'Achieving the 2.4% GDP target: The role of measurement in increasing investment in R&D and innovation,' NPL Report IEA 3, NPL, Teddington, UK, March 2020. [3] M. King and G. Tellett, 'The National Measurement System: A Customer Survey for Three of the Core Labs in the National Measurement System,' NMS Customer Survey Report 2018, NPL Teddington, UK, April 2020 [4] H. Kunzmann, T. Pfeifer, R. Schmitt, H. Schwenke, and A.Weckenmann, 'Productive metrology-adding value to manufacture,' CIRP Annals, vol. 54, pp. 155-168, 2005. https://doi.org/10.1016/S0007-8506(07)60024-9 [5] N. G. Orji, R. G. Dixson, A. Cordes, B. D. Bunday, and J. A. Allgair, 'Measurement traceability and quality assurance in a nanomanufacturing environment,' Instrumentation, Metrology, and Standards for Nanomanufacturing III, Proceedings Vol. 7405, 740505, August 2009. https://doi.org/10.1117/12.826606 [6] Belmana, Analysis for Policy 'Public Support for Innovation and Business Outcomes,' Belmana: London, UK, 2020. [7] R. Hawkins, Standards, systems of innovation and policy in Handbook of Innovation and Standards. Cheltenham, UK: Edward Elgar, 2019. [8] N. Nwaigbo, and M. King, 'Evaluating the Impact of the NMS Consultancy Projects on Supported Firms (Working Paper)' NPL, Teddington, UK, 2020. [9] M. King, R. Lambert, and P. Temple, Measurement, standards and productivity spillovers in Handbook of Innovation and Standards. Cheltenham, UK: Edward Elgar, 2017, p. 162. https://doi.org/10.4337/9781783470082.00016 [10] A. Font, K. de Hoogh, M. Leal-Sanchez, D. C. Ashworth, R. J. C. Brown, A. L. Hansell, and G. W. Fuller, 'Using metal ratios to detect emissions from municipal waste incinerators in ambient air pollution data,' Atmos. Environ., vol. 113, pp. 177-186, July 2015. https://doi.org/10.1016/j.atmosenv.2015.05.002 [11] S. Giannis, M. R. L. Gower, G. D. Sims, G. Pask, and G. Edwards, 'Increasing UK competitiveness by enhancing the composite materials regulatory infrastructure,' NPL Report MAT 90, NPL, Teddington, UK, October 2019. [12] HM Government, UK Research and Development Roadmap, BEIS, London, July 2020. [13] M. R. Mehra, S. S. Desai, F. Ruschitzka, and A. N. Patel, 'Hydroxychloroquine or chloroquine with or without a macrolide for treatment of COVID-19: a multinational registry analysis,' Lancet, 2020, https://doi.org/10.1016/S0140-6736(20)31180-6 (Print: ISSN 1931-5775) (Online: ISSN 2381-0580) ©2021 NCSL International Smart Power Supply Calibration System Iraj Vasaeli , Brandon Umansky NCSLI Measure | Vol. 13 No. 1 (2021) | doi.org/10.51843/measure.13.1.2 Publisher: NCSL International | Published February 2021 | Pages 22-27 Abstract: This paper details the development of an automated procedure to conduct calibrations of power supplies at Jet Propulsion Laboratory, California Institute of Technology (JPL). The fundamentals of power supply calibrations are given, and discussion on the method by which this custom software handles that calibration. Additionally, this technique provides real time uncertainty quantification of the calibrations. This automated system has demonstrated a time savings over existing automated techniques in use today. References: [1] Keysight, 'Low-Profile Modular Power System Series N6700 Service Guide', Part Number: 5969 2938, Edition 7, January 2015. [2] B. N. Taylor and C. E. Kuyatt, 'Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results', NIST Technical Note 1297, 1994. https://doi.org/10.6028/NIST.TN.1297 [3] JCGM, 'Evaluation of measurement data - Guide to the expression of uncertainty in measurement,' first edition (GUM 1995 with minor corrections),' JCGM 100, 2008. (Print: ISSN 1931-5775) (Online: ISSN 2381-0580) © 2021 NCSL International Computer Aided Verification of Voltage Dips and Short Interruption Generators for Electromagnetic Compatibility Immunity Test in Accordance with IEC 61000-4-11: 2004 + AMD: 2017 Hau Wah Lai , Cho Man Tsui , Hing Wah Li NCSLI Measure | Vol. 13 No. 1 (2021) | doi.org/10.51843/measure.13.1.3 Publisher: NCSL International | Published February 2021 | Pages 28-39 Abstract: This paper describes a procedure and a computer-aided system developed by the Standards and Calibration Laboratory (SCL) for verification of voltage dip and short interruption generators in accordance with the international standard IEC 61000-4-11:2004+AMD1:2017. The verification is done by calibrating the specified parameters and comparing with the requirements stated in the standard. The parameters that should be calibrated are the ratios of the residual voltages to the rated voltage, the accuracy of the phase angle at switching, and the rise time, fall time, overshoot and undershoot of the switching waveform. A specially built adapter is used to convert the high voltage output waveforms of the generators to lower level signals to be acquired by a digital oscilloscope. The other circuits required for the testing are also provided. In addition, the paper discusses the uncertainty evaluations for the measured parameters. References: [1] T. Williams, and K. Armstrong, 'EMC for Systems and Installations Part 6 - Low-Frequency Magnetics Fields (Emissions and Immunity) Mains Dips, Dropouts, Interruptions, Sags, Brownouts and Swells,' EMC Compliance Journal, August 2000. [2] M.I. Montrose, and E. M. Nakauchi, Testing for EMC Compliance: Approaches and Techniques, Wiley Interscience, 2004. https://doi.org/10.1002/047164465X [3] International Standard IEC 61000-4-11:2004+AMD1:2017:Electromagnetic Compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests. [4] Evaluation of measurement data - Guide to the expression of uncertainty in measurement, First Edition JCGM 100:2008. (Print: ISSN 1931-5775) (Online: ISSN 2381-0580) © 2021 NCSL International Validation of the Photometric Method Used for Micropipette Calibration Elsa Batista , Isabel Godinho, George Rodrigues, Doreen Rumery NCSLI Measure | Vol. 13 No. 1 (2021) | doi.org/10.51843/measure.13.1.4 Publisher: NCSL International | Published February 2021 | Pages 40-45 Abstract: There are two methods generally used for calibration of micropipettes: the gravimetric method described in ISO 8655-6:2002 and the photometric method described in ISO 8655-7:2005. In order to validate the photometric method, several micropipettes of different capacities from 0.1 µL to 1000 µL were calibrated using both methods (gravimetric and photometric) in two different laboratories, IPQ (Portuguese Institute for Quality) and Artel. These tests were performed by six different operators. The uncertainty for both methods was determined and it was verified that the uncertainty component that has a higher contribution to the final uncertainty budget depends on the volume delivered. In the photometric method for small volumes, the repeatability of the pipette is the largest uncertainty component, but for volumes, larger than 100 µL, the photometric instrument is the most significant source of uncertainty. Based on all the results obtained with this study, one may consider the photometric method validated. References: [1] ISO 8655-1/2/6/7, Piston-operated volumetric apparatus, 2002. [2] BIPM, International Vocabulary of Metrology, 3rd edition, JCGM 200:2012. [3] George Rodrigues, Bias and transferability in standards methods of pipette calibration, Artel, June 2003. [4] Taylor, et.al. The definition of primary method of measurement (PMM) of the 'highest metrological quality': a challenge in understanding and communication, Accred. Qual.Assur (2001) 6:103-106. https://doi.org/10.1007/PL00010444 [5] EURAMET project 1353, Volume comparison on Calibration of micropipettes - Gravimetric and photometric methods. [6] ASTM E542: Standard Practice for Calibration of laboratory Volumetric Apparatus, 2000. [7] ISO 4787; Laboratory glassware - Volumetric glassware - Methods for use and testing of capacity, 2010 . [8] ISO 13528:2005 - Statistical methods used in proficiency testing by interlaboratory comparisons. [9] BIPM et al, Guide to the Expression of Uncertainty in Measurement (GUM), 2nd ed., International Organization for Standardization, Genève, 1995. [10] EURAMET guide, cg 19, - Guidelines on the determination of uncertainty in gravimetric volume calibration, version 3.0, 2012. [11] E. Batista et all, A Study of Factors that Influence Micropipette Calibrations, Measure Vol. 10 No. 1, 2015 https://doi.org/10.1080/19315775.2015.11721717 [12] www.BIPM.org. (Print: ISSN 1931-5775) (Online: ISSN 2381-0580) © 2021 NCSL International Material Flow Rate Estimation in Material Extrusion Additive Manufacturing G. P. Greeff NCSLI Measure | Vol. 13 No. 1 (2021) | doi.org/10.51843/measure.13.1.5 Publisher: NCSL International | Published February 2021 | Pages 46-56 Abstract: The additive manufacturing of products promises exciting possibilities. Measurement methodologies, which measure an in-process dataset of these products and interpret the results, are essential. However, before developing such a level of quality assurance several in-process measurands must be realized. One of these is the material flow rate, or rate of adding material during the additive manufacturing process. Yet, measuring this rate directly in material extrusion additive manufacturing presents challenges. This work presents two indirect methods to estimate the volumetric flow rate at the liquefier exit in material extrusion, specifically in Fused Deposition Modeling or Fused Filament Fabrication. The methods are cost effective and may be applied in future sensor integration. The first method is an optical filament feed rate and width measurement and the second is based on the liquefier pressure. Both are used to indirectly estimate the volumetric flow rate. The work also includes a description of linking the G-code command to the final print result, which may be used to create a per extrusion command model of the part. References: [1] T. Wohlers, I. Campbell, O. Diegel, J. Kowen, I. Fidan, and D.L. Bourell, 'Wohlers Report 2017: 3D Printing and Additive Manufacturing State of the Industry Annual Worldwide Progress Report,' 2017. [2] Additive manufacturing -- General principles -- Terminology. Geneva, CH: International Organization for Standardization, 2015. [3] R. Jones et al., 'Reprap - The replicating rapid prototyper,' Robotica, vol. 29, no. 1 SPEC. ISSUE, pp. 177-191, 2011, https://doi.org/10.1017/S026357471000069X [4] T. Wohlers and T. Gornet, 'History of Additive Manufacturing 2017,' 2017. [5] S. A. M. Tofail, E. P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O'Donoghue, and C. Charitidis, 'Additive manufacturing: scientific and technological challenges, market uptake and opportunities, 'Materials Today, vol. 21, no. 1, pp. 22-37, Jan. 2018, https://doi.org/10.1016/j.mattod.2017.07.001 [6] G. Moroni and S. Petrò, 'Managing uncertainty in the new manufacturing era,' Procedia CIRP, vol. 75, pp. 1-2, 2018, https://doi.org/10.1016/j.procir.2018.07.001 [7] R. Leach et al., 'Information-rich manufacturing metrology,'in Eighth International Precision Assembly Seminar (IPAS), 2018, no. January. https://doi.org/10.1007/978-3-030-05931-6_14 [8] S. Moylan, J. Slotwinski, A. Cooke, K. Jurrens, M. A. Donmez, and A. Donmez, 'Proposal for a Standardized Test Artifact for Additive Manufacturing Machines and Processes,' Solid Freeform Fabrication Symposium Proceedings, pp. 902-920, 2012. https://doi.org/10.6028/NIST.IR.7858 [9] ASME Y14.46-2017 Product Definition for Additive Manufacturing. New York:The American Society of Mechanical Engineers, 2017. [10] H. Li, T. Wang, J. Sun, and Z. Yu, 'The effect of process parameters in fused deposition modelling on bonding degree and mechanical properties,' Rapid Prototyping Journal, vol. 24, no. 1, pp. 80-92, Jan. 2018, https://doi.org/10.1108/RPJ-06-2016-0090 [11] A. W. Gebisa and H. G. Lemu, 'Investigating effects of Fused-deposition modeling (FDM) processing parameters on flexural properties of ULTEM 9085 using designed experiment, 'Materials, vol.11, no. 4, pp. 1-23, 2018, https://doi.org/10.3390/ma11040500 PMid:29584674 PMCid:PMC5951346 [12] B. Wittbrodt and J. M. Pearce, 'The effects of PLA color on material properties of 3-D printed components,' Additive Manufacturing, vol. 8, pp. 110-116, 2015, https://doi.org/10.1016/j.addma.2015.09.006 [13] O. A. Mohamed, S. H. Masood, and J. L. Bhowmik, 'Optimization of fused deposition modeling process parameters: a review of current research and future prospects,' Advances in Manufacturing, vol. 3, no. 1, pp. 42-53, Mar. 2015, https://doi.org/10.1007/s40436-014-0097-7 [14] S. K. Everton, M. Hirsch, P. Stravroulakis, R. K. Leach and A. T. Clare, 'Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing,' Materials and Design, vol. 95, pp. 431-445, 2016, https://doi.org/10.1016/j.matdes.2016.01.099 [15] P. K. Rao, J. P. Liu, D. Roberson, Z. J. Kong, and C. Williams,'Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors,' Journal of Manufacturing Science and Engineering, vol. 137, no. 6, p.061007, Sep. 2015, https://doi.org/10.1115/1.4029823 [16] J. Pellegrino, T. Makila, S. McQueen, and E. Taylor, 'Measurement science roadmap for polymer-based additive manufacturing,' Gaithersburg, MD, Dec. 2016. https://doi.org/10.6028/NIST.AMS.100-5 [17] T. R. Kramer, F. M. Proctor, and E. Messina, 'The NIST RS274NGC Interpreter -Version 3,' Gaithersburg, Maryland, 2000. https://doi.org/10.6028/NIST.IR.6556 [18] B. N. Turner, R. Strong, and S. A. Gold, 'A review of melt extrusion additive manufacturing processes: I. Process design and modeling,' Rapid Prototyping Journal, vol. 20, no. 3, pp.192-204, Apr. 2014, https://doi.org/10.1108/RPJ-01-2013-0012 [19] Conrad Electronic, 'Renkforce RF1000 3D Drucker,' 2016. https://www.conrad.de/de/renkforce-rf1000-3d-drucker-single-extruder-inkl-software-franzis-designcad-v24-3d-printrenkforce-edition-1007508.html (accessed Sep. 20, 2016). [20] G. Hodgson, A. Ranellucci, and J. Moe, 'Slic3r Manual - Flow Math,' 2016. http://manual.slic3r.org/advanced/flow-math (accessed Jun. 21, 2016). [21] Repetier, 'Repetier-Firmware Documentation.' https://www.repetier.com/documentation/repetier firmware/repetier-firmware-introduction/ (accessed Apr. 17, 2018). [22] B. Weiss, D. W. Storti, and M. A. Ganter, 'Low-cost closedloop control of a 3D printer gantry,' Rapid Prototyping Journal, vol. 21, no. 5, pp. 482-490, Aug. 2015, https://doi.org/10.1108/RPJ-09-2014-0108 [23] R. L. Zinniel and J. S. Batchelder, 'Volumetric Feed Control for Flexible Filament,' US 6085957, 2000. [24] W. J. Heij, Applied Metrology in Additive Manufacturing. Delft: Delft University of Technology, 2016. [25] G. P. Greeff and M. Schilling, 'Closed loop control of slippage during filament transport in molten material extrusion,' Additive Manufacturing, vol. 14, pp. 31-38, 2017, https://doi.org/10.1016/j.addma.2016.12.005 [26] G. P. Greeff, Applied Metrology in Additive Manufacturing, vol. 60. Berlin: Mensch und Buch, 2019. [27] G. P. Greeff and M. Schilling, 'Comparing Retraction Methods with Volumetric Exit Flow Measurement in Molten Material Extrusion,' in Special Interest Group meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing, 2017, no. October, pp. 70-74. [28] G. P. Greeff and M. Schilling, 'Single print optimisation of fused filament fabrication parameters,' The International Journal of Advanced Manufacturing Technology, Aug. 2018, https://doi.org/10.1007/s00170-018-2518-4 [29] A. Bellini, S. Güçeri, and M. Bertoldi, 'Liquefier Dynamics in Fused Deposition,' Journal of Manufacturing Science and Engineering, vol. 126, no. 2, p. 237, 2004, https://doi.org/10.1115/1.1688377 [30] P. Virtanen et al., 'SciPy 1.0: fundamental algorithms for scientific computing in Python,' Nature Methods, vol. 17, no. 3, pp. 261-272, Mar. 2020, https://doi.org/10.1038/s41592-019-0686-2 PMid:32015543 PMCid:PMC7056644 (Print: ISSN 1931-5775) (Online: ISSN 2381-0580) © 2021 NCSL International Software to Maximize End-User Uptake of Conformity Assessment with Measurement Uncertainty, Including Bivariate Cases. The European EMPIR CASoft Project
Academic Journal
NCSL International measure. 13:58-69
검색 결과 제한하기
제한된 항목
[검색어] Williams, M. C. S.
발행연도 제한
-
학술DB(Database Provider)
저널명(출판물, Title)
출판사(Publisher)
자료유형(Source Type)
주제어
언어