학술논문
Performance and Fundamental Differences between Rheocast and High-Pressure Vacuum Die Cast Al-Si-Mg Alloys
Document Type
Article
Author
Source
Diffusion and Defect Data Part B: Solid State Phenomena; August 2023, Vol. 348 Issue: 1 p75-82, 8p
Subject
Language
ISSN
10120394
Abstract
The Al-Si-Mg family is the preferred group of casting alloys due to their excellent castability, good mechanical properties and corrosion resistance. The ENAC-AlSi7Mg0.3 (A356) alloy has been used for decades to produce structural parts such as automotive wheels or suspension parts. However, this alloy cannot be used for high pressure die casting (HPDC) due to die soldering issues. Casting parameters in rheocasting differs greatly from those in HPDC. The lower injection temperature and lower intensification pressure reduce the reactivity between the mould and the aluminium. This lower interaction allows the injection of permanent mould alloys using HPDC. The objective of this work is to compare current structural alloys with rheocasting. A wide range of alloys in the Al-Si-Mg (-Mn) family were cast using the RheometalTM semi-solid technology in addition to ENAC-AlSi7Mg0.3 (A356) used as a comparison basis. Firstly, it was proven that ENAC-AlSi7Mg0.3 (A356) can successfully be cast using rheocast HPDC. Secondly, the impact of magnesium and manganese were studied. Magnesium has a great impact on strength while manganese can further improve the strength by controlling the iron phase morphology. This work proves that various types of alloys can be cast using rheocast HPDC.